Available 24/7 at sales@steel-grades.com

X6CrNiTiB18-10/X8CrNiTi18-10

Description

Germany DIN X6CrNiTiB18-10/X8CrNiTi18-10 The high-temperature and high-strength steel and X6CrNiTiB18-10/X8CrNiTi18-10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Special Steel: X6CrNiTiB18-10/X8CrNiTi18-10
Category Type Steel Grade Standard Country Application
Steel GradesSpecial Steel X6CrNiTiB18-10/X8CrNiTi18-10 DIN Germany The high-temperature and high-strength steel
1.4935
X20CrMoWV12-1
1.4939
X12CrNiMoV12-3/X11CrNiMoN12
1.4938
X6CrNiTiB18-10/X8CrNiTi18-10
1.4941
X6CrNiWNb16-16
1.4945
1.4948

Chemical composition(mass fraction)(wt.%) of the X6CrNiTiB18-10/X8CrNiTi18-10

C(%) Si(%) Mn(%) P(%) S(%) Cr(%) Ni(%) Mo(%) B(%) Ti(%)
0.04-0.10 Max 0.75 Max 2.00 Max 0.035 Max 0.015 17.0-18.5 9.50-11.5 Max 0.60 0.0015-0.0050 Max 0.80

Mechanical Properties of steel grade X6CrNiTiB18-10/X8CrNiTi18-10

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
271 (≥) 832 (≥) 42 31 23 Solution and Aging, Annealing, Ausaging, Q+T,etc 342

Physical Properties of steel grade X6CrNiTiB18-10/X8CrNiTi18-10

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
13 - -     0.21 -  
494 243 - 34.3 233   -  
269 - 24 42.2   432 121

Heat Treatment of steel grade X6CrNiTiB18-10/X8CrNiTi18-10

Heat treated : 1422°C - 1613°C

Technological Curves of steel grade X6CrNiTiB18-10/X8CrNiTi18-10

Cross Reference Table (Equivalent Grade) of X6CrNiTiB18-10/X8CrNiTi18-10

Grade Standard Country Application
X6CrNiTiB18-10/X8CrNiTi18-10 DIN Germany The high-temperature and high-strength steel
X6CrNiTiB18-10/X8CrNiTi18-10 DIN Germany The high-temperature and high-strength steel
X6CrNiTiB18-10 AFNOR France Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999))
EN X6CrNiTiB18-10 EN Euronorm Euronorm Stainless Steel
EN X6CrNiTiB18-10 EN Euronorm Euronorm Stainless Steel
EN X6CrNiTiB18-10 EN Euronorm Euronorm Stainless Steel
EN X6CrNiTiB18-10 EN Euronorm Euronorm Stainless Steel
BH224/5 UK Carbide for cutting tools
BH224/5 UK Carbide for cutting tools
X2CrTi12/X6CrTi12 DIN Germany Stainless steel
X10CrAISi7/X10CrAI7 DIN Germany Stainless steel
X10CrAISi13/X10CrAI13 DIN Germany Martensitic special steel
X10CrAISi18/X10CrAI18 DIN Germany Stainless steel
X10CrAISi25/X10CrAI24 DIN Germany Stainless steel
X12CrNi23-13/X7CrNi23-14 DIN Germany Stainless steel
X8CrNiTi18-10/X12CrNiTi18-9 DIN Germany Stainless steel
45SiCr16-11/X45SiC DIN Germany Valve steel
X12CrNiMoV12-3/X11CrNiMoN12 DIN Germany The high-temperature and high-strength steel

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X6CrNiTiB18-10/X8CrNiTi18-10?
  • List your company on S&G now? Join
  • Non-paying users only
Top