USA ASTM CU-5MCuC Castings, Nickel and Nickel Alloy and CU-5MCuC Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Special Alloy | CU-5MCuC | ASTM | USA | Castings, Nickel and Nickel Alloy |
M-30C |
|||||
N-12MV |
|||||
N-7M |
|||||
CY-40 |
|||||
CW-12MW |
|||||
CW-6M |
|||||
CW-2M |
|||||
CW-6MC |
|||||
CY-5SnBiM |
|||||
CX-2MW |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | Nb(%) | Fe(%) |
---|---|---|---|---|---|---|---|---|---|
0.05 | 1 | 1 | 0.03 | 0.03 | 19.5-23.5 | 38.0-44.0 | 2.5-3.5 | 0.60-1.20 | Bal |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
392 (≥) | 447 (≥) | 43 | 11 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
11 | - | - | 0.11 | - | |||
377 | 815 | - | 31.3 | 324 | - | ||
771 | - | 12 | 32.2 | 212 | 143 |
Heat treated : 1742°C - 1418°C
Grade | Standard | Country | Application |
---|---|---|---|
CU-5MCuC | AISI | USA | |
CU-5MCuC | ASTM | USA | Castings, Nickel and Nickel Alloy |
CU-5MCuC | ASTM | USA | Castings, Nickel and Nickel Alloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com