18 15 3nC Mould Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Mould Steel | 18 15 3nC | |||
29 9 |
|||||
1.4337 |
|||||
13 4 |
|||||
1.4351 |
|||||
18 8Mn6 |
|||||
1.4370 |
|||||
19 1 2 3 |
|||||
1.4403 |
|||||
19 1 2 3nC |
|||||
1.4430 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.04 | 16.5-19.5 | 13.0-16.0 | ||||
Mo | Al | Cu | Nb | Ti | V | Ce |
2.5-3.5 | ||||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
623 (≥) | 943 (≥) | 41 | 44 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.33 | - | |||
951 | 336 | - | 24.3 | 143 | - | ||
183 | - | 12 | 41.2 | 342 | 114 |
Heat treated : 1884°C - 1552°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1018 | ASTM | USA | General use carbon steel bar |
UNS G10180 | UNS | USA | General use carbon steel bar |
W18Cr4V | China | High-speed tool steel | |
W18Cr4VCo8 | China | High-speed tool steel | |
W18Cr4V2Co8 | China | High-speed tool steel | |
ASTM A182 F55 | ASTM | USA | Super Duplex |
1.1820 | DIN | Germany | Carbon tool steel |
1.1830 | DIN | Germany | Carbon tool steel |
X91CrMoV18 | DIN | Germany | Cold working alloy tool steel |
X3NiCoMoTi18-9-5 | DIN | Germany | Cold working alloy tool steel |
1.2718 | DIN | Germany | Cold working alloy tool steel |
15NiCr18 | DIN | Germany | Cold working alloy tool steel |
S18-1-2-5 | DIN | Germany | High-speed tool steel |
S18-1-2-15 | DIN | Germany | High-speed tool steel |
S18-1-2-10 | DIN | Germany | High-speed tool steel |
1.3318 | DIN | Germany | High-speed tool steel |
S18-0-1 | DIN | Germany | High-speed tool steel |
E184 | Carbide for cutting tools | ||
E184 | Carbide for cutting tools | ||
E184 | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION