X11CrNiMoN 12 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | X11CrNiMoN 12 | |||
X8CrCoNiMo 10-6 |
|||||
X19CrMoVNbN 11-1 |
|||||
X6CrNiMo17-13 |
|||||
X15CrMo 12-1 |
|||||
X19CrMo 12-1 |
|||||
X20CrMoV 12-1 |
|||||
X20CrMoV 11-1 |
|||||
X22CrMoV 12-1 |
|||||
X20CrMoWV 12-1 |
|||||
X12CrNiMoV 12-3 |
C |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
0.08-0.15 | 0.50 | 0.40-0.90 | 0.025 | 0.015 | 11.0-12.5 | 2.00-3.00 | 1.50-2.00 |
V 0.25-0.40 N 0.020-0.040 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
791 (≥) | 342 (≥) | 24 | 44 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.43 | - | |||
712 | 242 | - | 14.3 | 331 | - | ||
657 | - | 24 | 22.2 | 434 | 241 |
Heat treated : 1593°C - 1656°C
Grade | Standard | Country | Application |
---|---|---|---|
X12CrNiMoV12-3/X11CrNiMoN12 | DIN | Germany | The high-temperature and high-strength steel |
UNS G10120 | UNS | USA | General use carbon steel bar |
T12 | China | Carbon tool steel | |
Cr12 | China | Alloy tool steel - cold work steels | |
Cr12Mo1V1 | China | Alloy tool steel - cold work steels | |
Cr12MoV | China | Alloy tool steel - cold work steels | |
SMCr12Mo1V1 | China | Plastic mould with flat steel | |
W12Cr4V5Co5 | China | High-speed tool steel | |
H12 | ASTM | USA | Alloy tool steel |
T20812 | UNS | USA | Alloy tool steel |
H13 | ASTM | USA | Alloy tool steel |
T12002 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12004 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12005 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12006 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12008 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12015 | UNS | USA | Tungsten series High-Speed Tool Steel |
CH-12 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
CQ-12 | AISI | USA | W-Co class carbide |
CY-12 | AISI | USA | W-Ti-Co class carbide |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com