X19CrMo 12-1 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | X19CrMo 12-1 | |||
NiCr20Co18Ti |
|||||
NiCo20Cr15MoAlTi |
|||||
NiCr15Fe |
|||||
X3CrNiMoN17-13 |
|||||
X3CrNiMoBN17-13 |
|||||
X8CrCoNiMo 10-6 |
|||||
X19CrMoVNbN 11-1 |
|||||
X6CrNiMo17-13 |
|||||
X15CrMo 12-1 |
|||||
GH1013 |
C |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
0.15-0.23 | 0.10-0.50 | 0.30-0.80 | 0.045 | 0.030 | 11.0-12.5 | ≤0.80 | 0.80-1.20 | ----------- |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
395 (≥) | 687 (≥) | 12 | 14 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 321 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.14 | - | |||
964 | 194 | - | 13.3 | 442 | - | ||
437 | - | 23 | 33.2 | 331 | 234 |
Heat treated : 1176°C - 1491°C
Grade | Standard | Country | Application |
---|---|---|---|
X19CrMoNbVN11-1 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
EN X19CrMoNiNbVN11-1 | EN | Euronorm Stainless Steel | |
X155CrVMo12-1 | DIN | Germany | Cold working alloy tool steel |
S12-1-4-5 | DIN | Germany | High-speed tool steel |
S12-1-4 | DIN | Germany | High-speed tool steel |
S12-1-2 | DIN | Germany | High-speed tool steel |
X200CrMo12-1 | AFNOR | France | Carbide for cutting tools |
X200CrMo12-1 | AFNOR | France | Carbide for cutting tools |
X210CrW12-1 | AFNOR | France | Carbide for cutting tools |
X210CrW12-1 | AFNOR | France | Carbide for cutting tools |
HS12-1-5-5 | JIS | France | Carbide for cutting tools |
HS12-1-5-5 | JIS | France | Carbide for cutting tools |
у12-1 | Russia | Carbide for cutting tools | |
у12-1 | Russia | Carbide for cutting tools | |
X22CrMoV12-1 | DIN | Germany | The high-temperature and high-strength steel |
X20CrMoWV12-1 | DIN | Germany | The high-temperature and high-strength steel |
X22CrMoV12-1 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
GX23CrMoV12-1 | Spain structural alloy steel | ||
GX7CiNiMo12-1 | Spain structural alloy steel | ||
EN X20CrMoV12-1 | EN | Euronorm Stainless Steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com