Permanickel 300 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Permanickel 300 | |||
Nitrex-1 |
|||||
NITRONIC 20 |
|||||
NITRONIC 30 |
|||||
NITRONIC 32 |
|||||
NITRONIC 33 |
|||||
NITRONIC 40 |
|||||
NITRONIC 50 |
|||||
NITRONIC 60 |
|||||
Nivco-10 |
|||||
NX188 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.25 | 0.06 | 00.1 | 0.005 | 98.6 | ||
Mg | Al | Cu | Nb | Ti | V | Ce |
0.35 | 0.02 | 0.5 | 0.1 | |||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
381 (≥) | 376 (≥) | 11 | 22 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.24 | - | |||
916 | 339 | - | 44.3 | 243 | - | ||
679 | - | 32 | 21.2 | 212 | 143 |
Heat treated : 1196°C - 1968°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10300 | UNS | USA | General use carbon steel bar |
S50300 | SS | USA | Martensitic special steel |
S42300 | UNS | USA | Martensitic special steel |
S42300 | UNS | USA | Martensitic special steel |
UNS S42300 | UNS | USA | precipitation hardening |
UNS S42300 | UNS | USA | precipitation hardening |
UNS S63005 | UNS | USA | precipitation hardening |
UNS S63007 | UNS | USA | precipitation hardening |
UNS S63008 | UNS | USA | precipitation hardening |
UNS S63009 | UNS | USA | precipitation hardening |
UNS J03000 | ASTM | USA | |
UNS J03001 | UNS | USA | |
UNS J93000 | AISI | USA | |
UNS J93005 | AISI | USA | |
UNS J93000 | AISI | USA | |
UNS J03002 | AISI | USA | |
UNS J03003 | AISI | USA | |
UNS J31300 | AISI | USA | |
411300 | The Czech republic Structural steel | ||
11300 | The Czech republic Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com