NITRONIC 60 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | NITRONIC 60 | |||
NIMONIC alloy NN |
|||||
NI-SPAN C-902 |
|||||
Nit. 135 |
|||||
Nitrex-1 |
|||||
NITRONIC 20 |
|||||
NITRONIC 30 |
|||||
NITRONIC 32 |
|||||
NITRONIC 33 |
|||||
NITRONIC 40 |
|||||
NITRONIC 50 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.1 | 3.5-4.5 | 7-9 | 16-18 | 8-9 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
0.08-0.18 | ||||||
Nitronic 60 physical properties:
density
8.0 g/cm3
Melting point
1375 ℃
Nitronic 60 at normal temperature alloy of the mechanical properties of the minimum:
state
Tensile strength Rm N/was
The yield strength RP0.2 N/was
Elongation A5 %
Brinell hardness HB
Solid melting state
690
380
35
More than 241
Nitronic 60 characteristics:
With cobalt and high nickel alloy, compared to Nitronic 60 stainless steel with very low cost can realize the corrosion resistance and wear resistance. Its overall better than most medium corrosion resistance of 304 type. In Nitronic 60, of the ability of pitting chloride better than 316 type.
The yield strength at room temperature is almost 304 and 316 two times.
Nitronic 60 have excellent resistance to high temperature oxidation resistance and impact resistance to low temperature.
Nitronic 60 application:
Widely used in electric power, chemical, petrochemical, food and oil and gas industry, including expansion joint wear-resistant plate, wear-resisting pump ring, bushings, process stem, seal and logging equipment.
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
185 (≥) | 827 (≥) | 34 | 44 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.31 | - | |||
349 | 447 | - | 32.3 | 124 | - | ||
735 | - | 12 | 22.2 | 343 | 412 |
Heat treated : 1834°C - 1935°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10060 | UNS | USA | General use carbon steel bar |
UNS G10160 | UNS | USA | General use carbon steel bar |
T41901 | UNS | USA | Alloy tool steel |
T51602 | UNS | USA | Alloy tool steel |
ASP60 | AISI | USA | Powder metallurgy high-speed tool steel |
HAP 60 | AISI | USA | Powder metallurgy high-speed tool steel |
C-60 | AISI | USA | Machining with carbide |
C60W | DIN | Germany | Carbon tool steel |
60WCrV7 | DIN | Germany | Cold working alloy tool steel |
1.2601 | DIN | Germany | Cold working alloy tool steel |
1.2604 | DIN | Germany | Cold working alloy tool steel |
60NiCrMoV12-4 | DIN | Germany | Cold working alloy tool steel |
60MnSiCr4 | DIN | Germany | Cold working alloy tool steel |
1.2360 | DIN | Germany | Hot working alloy tool steel |
1.2603 | DIN | Germany | Hot working alloy tool steel |
1.2606 | DIN | Germany | Hot working alloy tool steel |
X60WCrMoV9-4 | DIN | Germany | Hot working alloy tool steel |
SK60 | JIS | Japan | Carbon tool steel |
BL1 | Carbide for cutting tools | ||
BL1 | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com