INCONEL alloy 700 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | INCONEL alloy 700 | |||
INCONEL alloy 601GC |
|||||
INCONEL alloy 603XL |
|||||
INCONEL alloy 604 |
|||||
INCONEL alloy 610 |
|||||
INCONEL alloy 617 |
|||||
INCONEL alloy 625 |
|||||
INCONEL alloy 625 LCF |
|||||
INCONEL alloy 686 |
|||||
INCONEL alloy 690 |
|||||
INCONEL alloy 693 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.12 | 0.3 | 0.1 | 15 | 46 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
3.75 | 3 | 0.05 | 2.2 | |||
N | Co | Pb | B | Other | ||
28.5 | Fe 0.7 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
311 (≥) | 743 (≥) | 14 | 12 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.12 | - | |||
896 | 131 | - | 41.3 | 213 | - | ||
477 | - | 31 | 21.2 | 142 | 423 |
Heat treated : 1467°C - 1814°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
SS14:2700 | SS | Sweden | Carbide for cutting tools |
SS14:2700 | SS | Sweden | Carbide for cutting tools |
UNS S15700 | UNS | USA | precipitation hardening |
UNS S15700 | UNS | USA | precipitation hardening |
UNS S17700 | UNS | USA | precipitation hardening |
S15700 | UNS | USA | Martensitic special steel |
S15700 | UNS | USA | Martensitic special steel |
S17700 | UNS | USA | precipitation hardening |
S17700 | UNS | USA | precipitation hardening |
AISI 651 | AISI | USA | precipitation hardening |
AISI 651 | AISI | USA | precipitation hardening |
UNS N07001 | UNS | USA | precipitation hardening |
UNS N07002 | UNS | USA | precipitation hardening |
1.4700 | DIN | Germany | Stainless steel |
S700MC | Spain structural steel | ||
S700MC | Spain structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com