INCOLOY alloy FM 65 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | INCOLOY alloy FM 65 | |||
INCOLOY alloy 825 |
|||||
INCOLOY alloy 832 |
|||||
INCOLOY alloy 840 |
|||||
INCOLOY alloy 890 |
|||||
INCOLOY alloy 901 |
|||||
INCOLOY alloy 901 Mod |
|||||
INCOLOY alloy 903 |
|||||
INCOLOY alloy 908 |
|||||
INCOLOY alloy 926 |
|||||
INCOLOY alloy DS |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 0.5 | 1 | 0.03 | 0.03 | 19.5-23.5 | 38-46 |
Mo | Al | Cu | Nb | Ti | V | Ce |
2.5-3.5 | ≤0.2 | 1.5-3.0 | 0.6-1.2 | |||
N | Co | Pb | B | Other | ||
Fe≥22 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
755 (≥) | 336 (≥) | 11 | 23 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
43 | - | - | 0.14 | - | |||
523 | 323 | - | 22.3 | 313 | - | ||
157 | - | 33 | 31.2 | 333 | 414 |
Heat treated : 1431°C - 1941°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
EN FM2B3FU | EN | Euronorm Structural steel | |
X165CrV12 | DIN | Germany | Cold working alloy tool steel |
X165CrMoV12 | DIN | Germany | Cold working alloy tool steel |
X165CrCoMo12 | DIN | Germany | Cold working alloy tool steel |
65MnCrMo4 | DIN | Germany | Hot working alloy tool steel |
1.2365 | DIN | Germany | Hot working alloy tool steel |
1.3265 | DIN | Germany | High-speed tool steel |
SK65 | JIS | Japan | Carbon tool steel |
AISI 650 | AISI | USA | precipitation hardening |
AISI 652 | AISI | USA | precipitation hardening |
AISI 653 | AISI | USA | precipitation hardening |
AISI 665 | AISI | USA | precipitation hardening |
UNS S66545 | UNS | USA | precipitation hardening |
UNS S65007 | UNS | USA | precipitation hardening |
UNS S65006 | UNS | USA | precipitation hardening |
W-Nr 1.4565 | DIN | Germany | Stainless steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com