INCOLOY alloy 890 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | INCOLOY alloy 890 | |||
INCOLOY alloy 800H |
|||||
INCOLOY alloy 800HT |
|||||
INCOLOY alloy 801 |
|||||
INCOLOY alloy 802 |
|||||
INCOLOY alloy 804 |
|||||
INCOLOY alloy 805 |
|||||
INCOLOY alloy 810 |
|||||
INCOLOY alloy 825 |
|||||
INCOLOY alloy 832 |
|||||
INCOLOY alloy 840 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.1 | 1.8 | 1 | 0.03 | 0.015 | 25 | 42.5 |
Mo | Al | Cu | Nb | Ti | V | Ce |
1.5 | 0.7 | ≤0.75 | 0.4 | ≤1 | ||
N | Co | Pb | B | Other | ||
Ta 0.2 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
771 (≥) | 489 (≥) | 11 | 42 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
11 | - | - | 0.11 | - | |||
683 | 195 | - | 42.3 | 414 | - | ||
982 | - | 44 | 42.2 | 431 | 134 |
Heat treated : 1786°C - 1728°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
SUS890LTP | JIS | Japan | austenitic special steel |
UNS J21890 | AISI | USA | |
EN S8900 | EN | Euronorm Structural steel | |
EN S8900L | EN | Euronorm Structural steel | |
EN S8900L1 | EN | Euronorm Structural steel | |
J21890 | UNS | USA | Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
J21890 | UNS | USA | Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
1.8925 | EN | Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition | |
S890QL1 | EN | Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition | |
1.8940 | EN | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels | |
S890Q | EN | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels | |
1.8983 | EN | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels | |
S890QL | EN | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com