F10 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | F10 | |||
Duratherm 477 |
|||||
Duratherm 600 |
|||||
Duratherm 700 |
|||||
Duratherm 2602 |
|||||
E-4 |
|||||
Elgiloy |
|||||
EME |
|||||
ER 349 |
|||||
Esshete 1250 |
|||||
Expandal |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.1-0.2 | 1-1.4 | 0.5-0.8 | 7-9 | 19-22 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
417 (≥) | 994 (≥) | 34 | 14 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.31 | - | |||
685 | 452 | - | 11.3 | 141 | - | ||
633 | - | 41 | 34.2 | 134 | 421 |
Heat treated : 1346°C - 1612°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM CF10 | AISI | USA | |
ASTM CF10M | AISI | USA | |
ASTM CF10MC | AISI | USA | |
ASTM CF10SMnN | AISI | USA | |
CF10 | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10M | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10MC | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10SMnN | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10 | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10M | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10MC | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
CF10SMnN | ASTM | USA | Steel Castings, Iron-Chromium and Iron-Chromium-Nickel,Heat Resistant, for General Application |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com