Duratherm 700 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Duratherm 700 | |||
Denertia N1 |
|||||
Denertia N2 |
|||||
Denertia N8 |
|||||
Discaloy |
|||||
DP3W |
|||||
DUMET |
|||||
Dura-Form |
|||||
Duranickel 301 |
|||||
Duratherm 477 |
|||||
Duratherm 600 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 0.2-0.6 | 0.4-1.1 | 11.7-12.3 | ... | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
3.7-4.3 | 1.0-1.4 | 0.3 | 0.1 | 3.3-3.7 | ||
N | Co | Pb | Be | Other | ||
41-42 | ≤0.05 |
W3.6-4.2 Fe6.4-7.0 |
||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
993 (≥) | 164 (≥) | 22 | 33 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.21 | - | |||
242 | 962 | - | 13.3 | 222 | - | ||
521 | - | 21 | 12.2 | 423 | 324 |
Heat treated : 1943°C - 1491°C
Grade | Standard | Country | Application |
---|---|---|---|
SS14:2700 | SS | Sweden | Carbide for cutting tools |
SS14:2700 | SS | Sweden | Carbide for cutting tools |
UNS S15700 | UNS | USA | precipitation hardening |
UNS S15700 | UNS | USA | precipitation hardening |
UNS S17700 | UNS | USA | precipitation hardening |
S15700 | UNS | USA | Martensitic special steel |
S15700 | UNS | USA | Martensitic special steel |
S17700 | UNS | USA | precipitation hardening |
S17700 | UNS | USA | precipitation hardening |
AISI 651 | AISI | USA | precipitation hardening |
AISI 651 | AISI | USA | precipitation hardening |
UNS N07001 | UNS | USA | precipitation hardening |
UNS N07002 | UNS | USA | precipitation hardening |
1.4700 | DIN | Germany | Stainless steel |
S700MC | Spain structural steel | ||
S700MC | Spain structural steel | ||
411700 | The Czech republic Structural steel | ||
11700 | The Czech republic Structural steel | ||
EN S700MC | EN | Euronorm Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com