Denertia C1 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Denertia C1 | |||
Deloro alloy 40 |
|||||
Deloro alloy 40G |
|||||
Deloro alloy 41K |
|||||
Deloro alloy 42K |
|||||
Deloro alloy 44K |
|||||
Deloro alloy 45 |
|||||
Deloro alloy 50 |
|||||
Deloro alloy 56 |
|||||
Deloro alloy 60 |
|||||
Deloro alloy SP1068 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.5 | 26 | |||||
Mo | Al | Cu | Nb | Ti | V | Ce |
5 | ||||||
N | Co | Pb | B | Other | ||
... | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
493 (≥) | 474 (≥) | 42 | 42 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
34 | - | - | 0.41 | - | |||
396 | 591 | - | 21.3 | 222 | - | ||
158 | - | 32 | 43.2 | 413 | 244 |
Heat treated : 1271°C - 1165°C
Grade | Standard | Country | Application |
---|---|---|---|
C105W1 | DIN | Germany | Carbon tool steel |
C110W1 | DIN | Germany | Carbon tool steel |
C125W | DIN | Germany | Carbon tool steel |
C135W | DIN | Germany | Carbon tool steel |
C105W2 | DIN | Germany | Carbon tool steel |
TC120 | JIS | Japan | Carbon tool steel |
TC105 | JIS | Japan | Carbon tool steel |
SKC11 | JIS | Japan | Hollow Steel |
GC135 | SS | Sweden | Carbide for cutting tools |
GC135 | SS | Sweden | Carbide for cutting tools |
GC1025 | SS | Sweden | Carbide for cutting tools |
GC1025 | SS | Sweden | Carbide for cutting tools |
STC1 | Carbide for cutting tools | ||
STC1 | Carbide for cutting tools | ||
STS11 | Carbide for cutting tools | ||
STS11 | Carbide for cutting tools | ||
C105U | Carbide for cutting tools | ||
C105U | Carbide for cutting tools | ||
C120U | Carbide for cutting tools | ||
C120U | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com