Deloro alloy 60 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Deloro alloy 60 | |||
Deloro alloy 35 |
|||||
Deloro alloy 38 |
|||||
Deloro alloy 40 |
|||||
Deloro alloy 40G |
|||||
Deloro alloy 41K |
|||||
Deloro alloy 42K |
|||||
Deloro alloy 44K |
|||||
Deloro alloy 45 |
|||||
Deloro alloy 50 |
|||||
Deloro alloy 56 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.5 | 4.5 | 16 | ... | |||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
3.5 | Fe 4.5 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
262 (≥) | 887 (≥) | 32 | 23 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.42 | - | |||
479 | 527 | - | 31.3 | 133 | - | ||
716 | - | 11 | 12.2 | 113 | 121 |
Heat treated : 1868°C - 1622°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
UNS G10060 | UNS | USA | General use carbon steel bar |
UNS G10160 | UNS | USA | General use carbon steel bar |
T41901 | UNS | USA | Alloy tool steel |
T51602 | UNS | USA | Alloy tool steel |
ASP60 | AISI | USA | Powder metallurgy high-speed tool steel |
HAP 60 | AISI | USA | Powder metallurgy high-speed tool steel |
C-60 | AISI | USA | Machining with carbide |
C60W | DIN | Germany | Carbon tool steel |
60WCrV7 | DIN | Germany | Cold working alloy tool steel |
1.2601 | DIN | Germany | Cold working alloy tool steel |
1.2604 | DIN | Germany | Cold working alloy tool steel |
60NiCrMoV12-4 | DIN | Germany | Cold working alloy tool steel |
60MnSiCr4 | DIN | Germany | Cold working alloy tool steel |
1.2360 | DIN | Germany | Hot working alloy tool steel |
1.2603 | DIN | Germany | Hot working alloy tool steel |
1.2606 | DIN | Germany | Hot working alloy tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com