1010 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | 1010 | |||
BSt500S |
|||||
BSt500M |
|||||
1.0438 |
|||||
1.0466 |
|||||
G10050 |
|||||
1005 |
|||||
1006 |
|||||
G10060 |
|||||
1008 |
|||||
G10080 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.08-0.13 | 0.3-0.6 | 0.04 | 0.05 | |||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
3 ; 4 | ||||||
Si≤0.1%, 0.1-0.2%,0.2-0.4%,0.3-0.6%
Cu≤0.2%
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
473 (≥) | 899 (≥) | 32 | 43 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
33 | - | - | 0.43 | - | |||
119 | 299 | - | 34.3 | 444 | - | ||
315 | - | 11 | 11.2 | 233 | 132 |
Heat treated : 1711°C - 1756°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1010 | ASTM | USA | General use carbon steel bar |
UNS G10100 | UNS | USA | General use carbon steel bar |
321S51(1010) | austenitic special steel | ||
1010 | Australia Structural steel | ||
1010 | Australia Structural steel | ||
HA1010 | Australia Structural steel | ||
CA1010 | Australia Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com