1006 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Carbon Steel | 1006 | |||
| FDCrV |
|||||
| FDSiCr |
|||||
| BSt420S |
|||||
| 1.0428 |
|||||
| BSt500S |
|||||
| BSt500M |
|||||
| 1.0438 |
|||||
| 1.0466 |
|||||
| G10050 |
|||||
| 1005 |
|
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 0.08 | 0.25-0.4 | 0.04 | 0.05 | |||
| Mo | Al | Cu | Nb | Ti | V | Ce |
| N | Co | Pb | B | Other | ||
| 3 ; 4 | ||||||
Si≤0.1%, 0.1-0.2%,0.2-0.4%,0.3-0.6%
Cu≤0.2%
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 726 (≥) | 672 (≥) | 21 | 13 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 21 | - | - | 0.41 | - | |||
| 479 | 611 | - | 23.3 | 334 | - | ||
| 382 | - | 21 | 32.2 | 114 | 312 |
Heat treated : 1912°C - 1896°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| ASTM 1006 | ASTM | USA | General use carbon steel bar |
| UNS G10060 | UNS | USA | General use carbon steel bar |
| 1006 | Australia Structural steel | ||
| A1006 | Australia Structural steel | ||
| HA1006 | Australia Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com