| EN 1369 |
1996 - 09 |
Founding; magnetic particle inspection |
| EN 1370 |
1996 - 09 |
Founding; surface roughness inspection by visualtactile comparators |
| EN 1371-1 |
1994 - 02 |
Founding; liquid penetrant inspection; part 1: sand, gravity die and low pressure die castings |
| EN 1559-1 |
1994 - 08 |
Founding - Technical conditions of delivery - Part 1: General |
| EN 1559-2 |
1995 - 09 |
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1559-3 |
1994 - 08 |
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN 1559-5 |
1995 - 03 |
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1560 |
1994 - 08 |
Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 1561 |
1994 - 08 |
Founding - Grey cast irons |
| EN 1562 |
1994 - 08 |
Founding - Malleable cast irons |
| EN 1563 |
1994 - 08 |
Founding - Spheroidal graphite cast irons |
| EN 1564 |
1994 - 08 |
Founding - Austempered ductile cast irons |
| EN 12454 |
1996 - 12 |
Founding - Visual examination of surface disccontinuities - Steel and castings |
| EN 10001 |
1990 - 07 |
Definition and classification of pig - irons |
| EN 10016 - 1 |
1994 - 12 |
Non - alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
| EN 10016 - 2 |
1994 - 12 |
Non - alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
| EN 10016 - 3 |
1994 - 12 |
Non - alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
| EN 10016 - 4 |
1994 12 |
Non - alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
| EN 10020 |
1995 - 12 |
Definition and classification of grades of steel |
| EN 10020 / AC |
1996 - 08 |
Determination and classification of grades of steel; amendment to EN 10020: 1988 |
| EN 10021 |
1996 - 01 |
General technical delivery requirements for steel and iron products |
| EN 10024 |
1996 - 08 |
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
| EN 10025 |
1996 - 08 |
Hot rolled products of non -alloy structural steels; technical delivery conditions ( includes amendment A1: 1993) |
| EN 10027 - 1 |
1995 - 12 |
Designation systems for steels; part 1: steel names, principal symbols |
| EN 10027 - 2 |
1995 - 12 |
Designation systems for steels; part 2: numerical system |
| ECISS/IC 10 |
1995 - 12 |
Designation systems for steel: Additional symbols for steel names |
| EN 10028 - 1 |
1996 - 08 |
Flat products made of steels for pressure purposes; part 1: general requirements |
| EN 10028 - 2 |
1996 - 08 |
Flat products made of steels for pressure purposes; part 2: non - alloy and alloy steels with specified elevated temperature properties |
| EN 10028 - 3 |
1992 - 12 |
Flat products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized |
| EN 10028 - 4 |
1994 - 09 |
Flat products made of steels for pressure purposes; part 4: Nickel alloy steels with specified low temperature properties |
| EN 10028 - 5 |
1993 - 10 |
Flat products made of steels for pressure purposes; part 5: weldable fine grain steels, thermomechanically rolled |
| EN 10028 - 6 |
1993 - 10 |
Flat products made of steels for pressure purposes; part 6: weldable fine grain steels, quenched and tempered |
| EN 10029 |
1996 - 08 |
Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass |
| EN 10029/AC |
1996 - 08 |
Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass |
| EN 10034 |
1993 - 09 |
Structural steel I and H sections; tolerances on shape and dimensions |
| EN 10048 |
1995 - 06 |
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051 |
1991 - 12 |
Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape |
| EN 10051/A1 |
1995 - 09 |
Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape |
| EN 10052 |
1996 - 08 |
Vocabulary of heat treatment terms for ferrous products |
| EN 10055 |
1995 - 11 |
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| EN 10056 |
1991 - 03 |
Structural steel equal and unequal leg angles; tolerances on shape and dimensions |
| EN 10056 - 1 |
1994 - 11 |
Structural steel equal and unequal leg angles - Part 1: Dimensions |
| EN 10056 - 2 |
1993 - 09 |
Structural steel equal and unequal leg angles; part 2: tolerances on shape and dimensions |
| EN 10067 |
1992 - 08 |
Hot rolled bulb flats; dimensions and tolerances on shape and dimensions |
| EN 10079 |
1995 - 12 |
Definition of steel products |
| ENV 10080 |
1995 - 04 |
Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric |
| EN 10083 - 1 |
1996 - 08 |
Quenched and tempered steels; part 1: technical delivery conditions for special steels |
| EN 10083 - 1/A1 |
1995 - 03 |
Quenched and tempered steels - Part 1: Technical delivery conditions for special steels |
| EN 10083 - 2 |
1991 - 02 |
Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels |
| EN 10083 - 2/A1 |
1995 - 03 |
Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels |
| EN 10083 - 3 |
1995 - 09 |
Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels |
| EN 10084EN 10087 |
1995 - 021995 - 04 |
Case hardening steels - Technical delivery conditionsFree - cutting steels - Technical delivery conditions for semi - finished products, hot rolled bars and rods |
| EN 10088 - 1 |
1995 - 04 |
Stainless steels - Part 1: List of stainless steels |
| EN 10088 - 2 |
1995 - 04 |
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes |
| EN 10088 - 3 |
1995 - 04 |
Stainless steels - Part 3: Technical delivery conditions for semi - finished products, bars, rods and sections for general purposes |
| EN 10095 |
1996 - 02 |
Heat - resisting steels and alloys |
| EN 10106 |
1995 - 12 |
Cold rolled non - oriented electrical steel sheet and strip delivered in fully processed state |
| EN 10107 |
1995 - 12 |
Grain - oriented electrical steel sheet and strip delivered in fully processed state |
| EN 10111 |
1993 - 06 |
Continuously hot-rolled low carbon steel sheet and strip for cold bending; technical delivery conditions |
| EN 10113 - 1 |
1993 - 03 |
Hot-rolled products in weldable fine grain structural steels; part 1: general delivery conditions |
| EN 10113 - 2 |
1993 - 03 |
Hot-rolled products in weldable fine grain structural steels; part 2: delivery conditions for normalized/normalized rolled steels |
| EN 10113 - 3 |
1993 - 03 |
Hot-rolled products in weldable fine grain structural steels; part 3: delivery conditions for thermomechanical rolled steels |
| EN 10120 |
1994 - 06 |
Steel sheet and strip for welded gas cylinders |
| EN 10126 |
1995 - 12 |
Cold rolled electrical non-alloyed steel sheet and strip delivered in semi-processed state |
| EN 10130 |
1991 - 03 |
Cold rolled low carbon steel flat products for cold forming; technical delivery conditions |
| EN 10130/A1 |
1995 - 03 |
Cold rolled low carbon steel flat products for cold forming; -Technical delivery conditions |
| EN 10137 - 2 |
1995 - 09 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
| EN 10131 |
1991 - 11 |
Cold rolled uncoated low carbon high yield strength steel flat products for cold forming;tolerances on dimensions and shape |
| EN 10137 - 1 |
1995 - 09 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions |
| EN 10137 - 2 |
1995 - 09 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
| EN 10137 - 3 |
1995 - 09 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
| EN 10138 - 1 |
1991 - 11 |
Prestressing steels; part 1: general requirements |
| EN 10138 - 2 |
1991 - 11 |
Prestressing steels; part 2: stress relieved cold drawn wire |
| EN 10138 - 3 |
1991 - 11 |
Prestressing steels; part 3: strand |
| EN 10138 - 4 |
1991 - 11 |
Prestressing steels; part 4: hot rolled and processed bars |
| EN 10138 - 5 |
1991 - 11 |
Prestressing steels; part 5: quenched and tempered wire |
| EN 10139 |
1992 - 10 |
Cold rolled uncoated mild steel narrow strip for cold forming; technical delivery conditions |
| EN 10140 |
1992 - 10 |
Cold rolled narrow steel strip; tolerances on dimensions and shape |
| EN 10142 |
1996 - 08 |
Continously hot-dip zinc coated low carbon steel sheet and strip for cold forming; technical delivery conditions |
| EN 10143 |
1993 - 01 |
Continously hot-dip metal coated steel sheet and strip; tolerances on dimensions and shape |
| EN 10147 |
1991 - 11 |
Continously hot-dip zinc coated unalloyed structural steel sheet and strip; technical delivery conditions |
| EN 10147/A1 |
1995 - 06 |
Continously hot-dip zinc coated structural steel strip and sheet - Technical delivery conditions; Amendment A1 |
| EN 10149 - 1 |
1995 - 09 |
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions |
| EN 10149 - 2 |
1995 - 09 |
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels |
| EN 10149 - 3 |
1995 - 09 |
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels |
| EN 10152 |
1993 - 10 |
Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions |
| EN 10154 |
1995 - 10 |
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions |
| EN 10155 |
1993 - 06 |
Structural steels with improved atmospheric corrosion resistance; technical delivery conditions |
| EN 10163 - 1 |
1991 - 08 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 1: general requirements |
| EN 10163 - 2 |
1991 - 08 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 2: plate and wide flats |
| EN 10163 - 3 |
1991 - 08 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: sections |
| EN 10163 - 4 |
1991 - 09 |
Delivery requirements for surface quality of hot rolled steel products; part 4: round bars and wire rod |
| EN 10164 |
1993 - 06 |
Steel products with improved deformation properties perpendicular of the product; technical delivery conditions |
| EN 10165 |
1995 - 12 |
Cold rolled electrical alloyed steel sheet and strip delivered in semi - processed state |
| EN 10169 - 1 |
1995 - 08 |
Continuously organic coated steel flat products - Part 1: General information (definitions, materials, tolerances, test methods ) |
| EN 10169 - 2 |
1995 - 10 |
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10173 |
1987 - 03 |
Double cold reduced electrolytic chromium/chromium oxide coated steel; coil for subsequent cutting into sheets |
| EN 10202 |
1996 - 08 |
Cold reduced electrolytic chromium/chromium oxide coated steel |
| EN 10203 |
1991 - 08 |
Cold reduced electrolytic tinplate |
| EN 10204 |
1996 - 01 |
Metallic products; types of inspection documents |
| EN 10204/A1 |
1996 - 01 |
Metallic products-Types of inspection documents; Amendment A1 |
| EN 10205 |
1991 - 11 |
Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel |
| EN 10207 |
1991 - 11 |
Steels for simple pressure vessels; technical delivery requirements for plates, strips and bars |
| EN 10208 - 1 |
1992 - 11 |
Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 1: pipes of requirement class A |
| EN 10208 - 2 |
1996 - 09 |
Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 2: pipes of requirement class B |
| EN 10209 |
1996 - 10 |
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| EN 10210 - 1 |
1994 - 03 |
Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 1: technical delivery requirements |
| EN 10210 - 2 |
1992 - 09 |
Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 2: tolerances, dimension and sectional properties |
| EN 10213 - 1 |
1995 - 12 |
Technical delivery conditions for steel castings for pressure purposes - Part 1: General |
| EN 10213 - 2 |
1995 - 12 |
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures |
| EN 10213 - 3 |
1995 - 12 |
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures |
| EN 10213 - 4 |
1995 - 12 |
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic - ferritic steel grades |
| EN 10214 |
1995 - 02 |
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
| EN 10215 |
1995 - 02 |
Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
| EN 10216-1 |
1995 - 11 |
Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: non-alloy steel with specified room temperature properties |
| EN 10217 - 1 |
1991 - 02 |
Welded steel tubes for pressure purposes; technical delivery conditions; part 1: non -alloy steel with specified room temperature properties |
| EN 10218 - 1EN 10218 - 2 |
1994 - 031995 - 11 |
Steel wire and wire products; general; part 1: test methodsSteel wire and wire products; general; part 2: wire dimensions and tolerances |
| EN 10219 - 1 |
1992 - 09 |
Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements |
| EN 10219 - 2 |
1992 - 09 |
Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties |
| ENV 10220 |
1993 - 11 |
Seamless and welded steel tubes; dimensions and masses per unit length |
| EN 10221 |
1995 - 11 |
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10222 - 1 |
1994 - 06 |
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| EN 10222 - 3 |
1994 - 06 |
Steel forgings for pressure purposes - Part 3: Ferritic and martensitic steels with elevated temperature properties |
| EN 10222 - 4 |
1994 - 06 |
Steel forgings for pressure purposes - Part 4: Nickel steels with specified low temperature properties |
| EN 10222 - 5 |
1994 - 06 |
Steel forgings for pressure purposes - Part 5: Fine grain steels with high proof stress |
| EN 10222 - 6 |
1994 - 06 |
Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels |
| EN 10223 - 1 |
1993 - 02 |
Steel wire and wire products for fences; part 1: zinc and zinc-alloy coated steel barbed wire |
| EN 10223 - 2 |
1993 - 04 |
Steel wire and wire products for fences; part 2: hexagonal steel wire netting for agricultural, insulation, and fencing purposes |
| EN 10223 - 3 |
1993 - 04 |
Steel wire and wire products for fences; part 3: hexagonal steel wire netting for engineering purposes |
| EN 10223 - 4 |
1994 -10 |
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
| EN 10223 - 5 |
1994 -10 |
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted joint stock fencing |
| EN 10223 - 6 |
1994 -10 |
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
| EN 10224 |
1995 - 05 |
Steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
| EN 10225 |
1994 - 10 |
Weldable structural steels for fixed offshore structures |
| EN 10226 - 1 |
1995 -11 |
Pipe threads where pressure tight joints are made on the threads - Part 1: Designation, dimensions and tolerances |
| EN 10229 |
1995 - 08 |
Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
| EN 10230 |
1993 - 02 |
Steel wire and wire products; common, special and loose feed stock steel wire machine nails |
| EN 10238 |
1995 - 12 |
Automatically blast cleaned and primed steel products |
| EN 10240 |
1994 - 06 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings |
| EN 10241 |
1994 - 06 |
Threaded steel fittings |
| EN 10242 |
1994 - 11 |
Threaded pipe fitting in malleable cast iron |
| EN 10243 - 1 |
1995 - 08 |
Steel drop and press forgings - Tolerances on dimensions |
| EN 10243 - 2 |
1995 - 08 |
Steel upset forgings made on horizontal forging machines -Tolerances on dimensions |
| EN 10244 - 1 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles |
| EN 10244 - 2 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings on steel wire |
| EN 10244 - 3 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings |
| EN 10244 - 4 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings |
| EN 10244 - 5 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings |
| EN 10244 - 6 |
1995 - 01 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings |
| EN 10245 - 1 |
1995 - 01 |
Steel wire and wire products - Organic coatings on wire -Part 1: General rules |
| EN 10245 - 2 |
1995 - 01 |
Steel wire and wire products - Organic coatings on wire -Part 2: PVC coated wire |
| EN 10245 - 3 |
1995 - 01 |
Steel wire and wire products - Organic coatings on wire -Part 3: PE coated wire |
| EN 10248 - 1 |
1995 - 06 |
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10248 - 2 |
1995 - 06 |
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10249 - 1 |
1995 - 06 |
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10249 - 2 |
1995 - 06 |
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10253 - 1 |
1994 - 01 |
Butt; welding pipe fittings wrought carbon steel without specific inspection requirements |
| EN 10254 |
1995 - 08 |
Steel closed die forgings - General technical delivery conditions |
| EN 10255 |
1996 - 01 |
Non-alloy steel tubes suitable for welding or threading |
| EN 10257 - 1 |
1994 - 11 |
Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 1: Land cables |
| EN 10257 - 2 |
1994 - 11 |
Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 2: Submarine cables |
| EN 10267 |
1995 - 08 |
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures |
| EN 10268 |
1995 - 10 |
Cold-rolled flat products made of high field strength steels for cold forming - General delivery conditions |
| EN 10271 |
1996 - 03 |
Electrolyticaly zinc-nickel (ZN) coated cold roled steel flat products - Tehnical delvery conditions |
| EN 10283 |
1996 - 04 |
Corrosion resistant steel casting |
| EN 10284 |
1996 - 04 |
Malleable cast iron fittings with commresion ends for plastics piping system |
| EN 10285 |
1996 - 12 |
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coating |
| EN 10286 |
1996 - 12 |
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings |
| EN 10287 |
1996 - 12 |
Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings |
| EN 10288 |
1997 - 01 |
Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 20049 - 01 |
1991 - 12 |
Melleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1 |
| EN 29658 |
1991 - 12 |
Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658 :1990) |
| EN ISO 945 |
1994 - 07 |
Cast iron - Designation of microstructure of graphite (ISO 945 : 1975) |
| EN ISO 1127 |
1995 - 10 |
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
| EN ISO 3785 |
1995 - 01 |
Steel - Designation of test piece axes (ISO 3785 : 1976) |
| EN ISO 8434 - 1 |
1995 - 05 |
Metallic tube connections for fluid power and general use - Part 1: 24 < Grad > compression fittings (ISO 8434-1:1994) |
| EN ISO 10380 |
1995 - 05 |
Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994) |
