Designation |
Title |
ISO 3178:1988 |
Steel wire ropes for general purposes -- Terms of acceptance |
ISO 3189-1:1985 |
Sockets for wire ropes for general purposes -- Part 1: General characteristics and conditions of acceptance |
ISO 3189-2:1985 |
Sockets for wire ropes for general purposes -- Part 2: Special requirements for sockets produced by forging or machined from the solid |
ISO 3189-3:1985 |
Sockets for wire ropes for general purposes -- Part 3: Special requirements for sockets produced by casting |
ISO 4101:1983 |
Drawn steel wire for elevator ropes -- Specifications |
ISO 4344:2004 |
Steel wire ropes for lifts -- Minimum requirements |
ISO 4345:1988 |
Steel wire ropes -- Fibre main cores -- Specification |
ISO 4346:1977 |
Steel wire ropes for general purposes -- Lubricants -- Basic requirements |
ISO 6984:1990 |
Round non-alloy steel wires for stranded wire ropes for mine hoisting -- Specifications |
ISO 7531:1987 |
Wire rope slings for general purposes -- Characteristics and specifications |
ISO 7595:1984 |
Socketing procedures for wire ropes -- Molten metal socketing |
ISO/TR 7596:1982 |
Socketing procedures for wire ropes -- Resin socketing |
ISO 7900:1988 |
Zinc-coated steel wire for fencing |
ISO 7989:1988 |
Zinc coatings for steel wire |
ISO 8457-1:1989 |
Steel wire rod -- Part 1: Dimensions and tolerances |
ISO 8792:1986 |
Wire rope slings -- Safety criteria and inspection procedures for use |
ISO 8793:1986 |
Steel wire ropes -- Ferrule-secured eye terminations |
ISO 8794:1986 |
Steel wire ropes -- Spliced eye terminations for slings |
ISO 9975:1990 |
Round non-alloy steel wires for locked coil mine winding ropes -- Specifications |
ISO 657-1:1989 |
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions |
ISO 657-2:1989 |
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions |
ISO 657-5:1976 |
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series |
ISO 657-11:1980 |
Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties |
ISO 657-15:1980 |
Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties |
ISO 657-16:1980 |
Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties |
ISO 657-18:1980 |
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances |
ISO 657-19:1980 |
Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances |
ISO 657-21:1983 |
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions |
ISO 4951-1:2001 |
High yield strength steel bars and sections -- Part 1: General delivery requirements |
ISO 4951-2:2001 |
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
ISO 4951-3:2001 |
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels |
ISO 559:1991 |
Steel tubes for water and sewage |
ISO 630-2:2000 |
Structural steels -- Part 2: Technical delivery requirements for hot-finished hollow sections |
ISO 657-14:2000 |
Hot-rolled steel sections -- Part 14: Hot-finished structural hollow sections -- Dimensions and sectional properties |
ISO 1129:1980 |
Steel tubes for boilers, superheaters and heat exchangers -- Dimensions, tolerances and conventional masses per unit length |
ISO 2037:1992 |
Stainless steel tubes for the food industry |
ISO 2937:1974 |
Plain end seamless steel tubes for mechanical application |
ISO 3183-1:1996 |
Petroleum and natural gas industries -- Steel pipe for pipelines -- Technical delivery conditions -- Part 1: Pipes of requirement class A |
ISO 3183-2:1996 |
Petroleum and natural gas industries -- Steel pipe for pipelines -- Technical delivery conditions -- Part 2: Pipes of requirements class B |
ISO 3183-3:1999 |
Petroleum and natural gas industries -- Steel pipe for pipelines -- Technical delivery conditions -- Part 3: Pipes of requirement class C, Cor 1:2000 |
ISO 4019:2001 |
Structural steels -- Cold-formed, welded, structural hollow sections -- Dimensions and sectional properties |
ISO 6594:1983 |
Cast iron drainage pipes and fittings -- Spigot series |
ISO 6758:1980 |
Welded steel tubes for heat exchangers |
ISO 6759:1980 |
Seamless steel tubes for heat exchangers |
ISO 9302:1994 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness |
ISO 9303:1989 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
ISO 9304:1989 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections |