USA ASTM A8 Alloy tool steel and A8 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | A8 | ASTM | USA | Alloy tool steel |
A3 |
|||||
T30103 |
|||||
A4 |
|||||
T30104 |
|||||
A5 |
|||||
T30105 |
|||||
A6 |
|||||
T30106 |
|||||
A7 |
|||||
T30107 |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | W(%) | Cu(%) |
---|---|---|---|---|---|---|---|---|---|
0.50~0.60 | 0.75~1.10 | 0.20~0.50 | ≤0.030 | ≤0.030 | 4.75~5.50 | ≤0.75 | 1.15~1.65 | 1.00~1.50 | ≤0.75 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
318 (≥) | 956 (≥) | 21 | 11 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.22 | - | |||
545 | 342 | - | 32.3 | 114 | - | ||
589 | - | 11 | 31.2 | 413 | 113 |
Heat treated : 1885°C - 1751°C
Grade | Standard | Country | Application |
---|---|---|---|
H10 | ASTM | USA | Alloy tool steel |
A8 | ASTM | USA | Alloy tool steel |
CA85T | AS | Australia | Australia Structural steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com