USA SAE SAE EV9 precipitation hardening and SAE EV9 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Special Steel | SAE EV9 | SAE | USA | precipitation hardening |
| UNS S63017 |
|||||
| SAE EV4 |
|||||
| SAE EV5 |
|||||
| UNS S63014 |
|||||
| SAE EV6 |
|||||
| UNS S63015 |
|||||
| SAE EV7 |
|||||
| UNS S63007 |
|||||
| UNS S63008 |
|||||
| SAE EV8 |
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | W(%) |
|---|---|---|---|---|---|---|---|---|
| 0.35-0.50 | 0.30-0.80 | Max 1.00 | Max 0.045 | Max 0.030 | 12.0-15.0 | 12.0-15.0 | 0.20-0.50 | 1.50-3.00 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 388 (≥) | 759 (≥) | 32 | 11 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 22 | - | - | 0.33 | - | |||
| 118 | 624 | - | 31.3 | 122 | - | ||
| 322 | - | 32 | 22.2 | 424 | 234 |
Heat treated : 1755°C - 1444°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| SAE NVl(1541) | SAE | USA | precipitation hardening |
| SAE NV2(1547) | SAE | USA | precipitation hardening |
| SAE NV3 | SAE | USA | precipitation hardening |
| SAE NV4(3140) | SAE | USA | precipitation hardening |
| SAE NV5(8645) | SAE | USA | precipitation hardening |
| SAE NV6(5150) | SAE | USA | precipitation hardening |
| SAE NV7(4140) | SAE | USA | precipitation hardening |
| SAE NV8 | USA | precipitation hardening | |
| SAE NV9 | SAE | USA | precipitation hardening |
| SAE HNVl | SAE | USA | precipitation hardening |
| SAE HNV2 | SAE | USA | precipitation hardening |
| SAE HNV3 | SAE | USA | precipitation hardening |
| SAE HNV4 | SAE | USA | precipitation hardening |
| SAE HNV5 | SAE | USA | precipitation hardening |
| SAE HNV6 | SAE | USA | precipitation hardening |
| SAE HNV7(71360) | SAE | USA | precipitation hardening |
| SAE HNV8 | SAE | USA | precipitation hardening |
| SAE EVl | SAE | USA | precipitation hardening |
| SAE EV2 | SAE | USA | precipitation hardening |
| SAE EV3 | SAE | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com