Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

A 286

Favorite Datasheet
René88DT MP35N
#A-286

Description

USA AMS SAE AMS 5525J (2007), SAE AMS 5726E (2008), SAE AMS 5731L (2006), SAE AMS 5732J (2006), SAE AMS 5734K (2006), SAE AMS 5735J (1974), SAE AMS 5736G (1974), SAE AMS 5737P (2006), SAE AMS 5810B (2008), SAE AMS 5853C (2006), SAE AMS 5858D (2009), SAE AMS 5895E (2009), SAE AMS 5804H (2013), SAE AMS 5805H (2012), A 286 Superalloys A286 is also widely used in the offshore oil and gas industry where the components are subject to high levels of heat and stress. and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Superalloys: A 286
Category Class Grade Standard Country Application
Steel GradesSuperalloys A 286 AMS USA A286 is also widely used in the offshore oil and gas industry where the components are subject to high levels of heat and stress.

Chemical composition(mass fraction)(wt.%) of the A 286

C Mn P S Si Cr Ni Mo Ti V Al B Co Cu
≤0.08 ≤2.00 ≤0.025 ≤0.025 ≤1.00 13.50 -16.00 24.00 -27.00 1.00 -1.50 1.90 -2.35 0.10 -0.50 ≤0.35 0.0003 -0.010 ≤1.00 ≤0.50

Mechanical Properties of steel grade A 286

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
373 (≥) 547 (≥) 43 43 13 Solution and Aging, Annealing, Ausaging, Q+T,etc 232

Physical Properties of steel grade A 286

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
12 - -     0.14 -  
134 715 - 22.3 423   -  
281 - 41 42.2   442 221

Heat Treatment of steel grade A 286

Heat treated : 1198°C - 1811°C

Technological Curves of steel grade A 286

Cross Reference Table (Equivalent Grade) of A 286

Grade Standard Country Application
A-286
A-286

Relevant standard of A 286

SAE AMS 5525J (2007) Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated SAE-AMS-5525J-(2007).pdf
SAE AMS 5726E (2008) Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Melted 200 ksi (1379 MPa) Tensile Strength SAE-AMS-5726E-(2008).pdf
SAE AMS 5731L (2006) Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 °F (982 °C) Solution Heat Treated SAE-AMS-5731L-(2006).pdf
SAE AMS 5732J (2006) Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution and Precipitation Heat Treated SAE-AMS-5732J-(2006).pdf
SAE AMS 5734K (2006) Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1650 °F (899 °C) Solution Heat Treated SAE-AMS-5734K-(2006).pdf
SAE AMS 5735J (1974) Steel Bars, Forgings, Tubing, And Rings, Corrosion And Heat resistant 15Cr-26Ni-1.3Mo-2.1Ti-0.3V 1800°F (982.2°C) Solution and Precipitaion Heat Treated SAE-AMS-5735J-(1974).pdf
SAE AMS 5736G (1974) Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15Cr 26Ni 1.3Mo 2.1Ti 0.30V 1800°F (982°C) Solution Heat Treated SAE-AMS-5736G-(1974).pdf
SAE AMS 5737P (2006) Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 °F (899 °C) Solution and Precipitation Heat Treated SAE-AMS-5737P-(2006).pdf
SAE AMS 5810B (2008) Steel, Corrosion and Heat Resistant, Flat Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Melted SAE-AMS-5810B-(2008).pdf
SAE AMS 5853C (2006) Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) lösungsgeglüht and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength SAE-AMS-5853C-(2006).pdf
SAE AMS 5858D (2009) Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Multiple Melted, 1800 °F (982 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable SAE-AMS-5858D-(2009).pdf
SAE AMS 5895E (2009) Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable SAE-AMS-5895E-(2009).pdf
SAE AMS 5804H (2013) Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V SAE-AMS-5804H-(2013).pdf
SAE AMS 5805H (2012) Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging SAE-AMS-5805H-(2012).pdf
René88DT MP35N
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this A 286?
  • List your company on S&G now? Join
  • Non-paying users only
Top