International ISO ISO 15510 (2010), ISO 16143-1 (2004), ISO 16143-2 (2004), ISO 16143-3 (2005), ISO 9328-7 (2011), ISO/TS 15510 (2003), X6CrNiMoTi17-12-2 Specialsteel Stainless steels - Chemical composition and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | X6CrNiMoTi17-12-2 | Austenite | ISO | International | Stainless steels - Chemical composition |
C | Si | Mn | P | S | Cr | Ni | Mo | N | Ti |
---|---|---|---|---|---|---|---|---|---|
≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 16.50 -18.50 | 10.50 -13.50 | 2.00 -2.50 | ≤ ≥ | 5×C% -0.60 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
199 (≥) | 513 (≥) | 11 | 24 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | - | - | 0.11 | - | |||
419 | 864 | - | 32.3 | 323 | - | ||
359 | - | 14 | 23.2 | 113 | 134 |
Heat treated : 1667°C - 1226°C
Grade | Standard | Country | Application |
---|---|---|---|
X6CrNiMoTi17-12-2 | |||
X6CrNiMoTi17-12-2 |
ISO 15510 (2010) | Stainless steels -- Chemical composition | ISO-15510-(2010).pdf |
ISO 16143-1 (2004) | Stainless steels for general purposes -- Part 1: Flat products | ISO-16143-1-(2004).pdf |
ISO 16143-2 (2004) | Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections | ISO-16143-2-(2004).pdf |
ISO 16143-3 (2005) | Stainless steels for general purposes -- Part 3: Wire | ISO-16143-3-(2005).pdf |
ISO 9328-7 (2011) | Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels | ISO-9328-7-(2011).pdf |
ISO/TS 15510 (2003) | Stainless steels - Chemical composition | ISO-TS-15510-(2003).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com