International ISO ISO 15510 (2010), ISO 16143-1 (2004), ISO 16143-2 (2004), ISO 16143-3 (2005), ISO 6931-2, ISO/TS 15510 (2003), X10CrNi18-8 Specialsteel Stainless steels - Chemical composition and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | X10CrNi18-8 | Austenite | ISO | International | Stainless steels - Chemical composition |
C | Si | Mn | P | S | Cr | Ni | Mo | N |
---|---|---|---|---|---|---|---|---|
0.05 -0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 16.00 -19.00 | 6.00 -9.50 | ≤0.80 | ≤0.11 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
161 (≥) | 134 (≥) | 43 | 32 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
31 | - | - | 0.22 | - | |||
614 | 555 | - | 32.3 | 442 | - | ||
464 | - | 31 | 11.2 | 112 | 422 |
Heat treated : 1788°C - 1999°C
Grade | Standard | Country | Application |
---|---|---|---|
X10CrNi18-8 | |||
GX10CrNi18-8 | |||
X10CrNi18-8 | |||
X10CrNi18-8 |
ISO 15510 (2010) | Stainless steels -- Chemical composition | ISO-15510-(2010).pdf |
ISO 16143-1 (2004) | Stainless steels for general purposes -- Part 1: Flat products | ISO-16143-1-(2004).pdf |
ISO 16143-2 (2004) | Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections | ISO-16143-2-(2004).pdf |
ISO 16143-3 (2005) | Stainless steels for general purposes -- Part 3: Wire | ISO-16143-3-(2005).pdf |
ISO 6931-2 | Stainless steels for springs - Part 2: Narrow strip | ISO-6931-2.pdf |
ISO/TS 15510 (2003) | Stainless steels - Chemical composition | ISO-TS-15510-(2003).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com