Available 24/7 at contact@steel-grades.com

Description

France AFNOR NF EN 10028-7, NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-4, NF EN 10088-5, NF EN 10222-5, NF EN 10250-4, NF EN 10272, 1.4406 Specialsteel Stainless steel bars for pressure purposes and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4406
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel 1.4406 Austenite AFNOR France Stainless steel bars for pressure purposes

Chemical composition(mass fraction)(wt.%) of the 1.4406

C Si Mn P S Cr Mo Ni N
≤0.030 ≤1.00 ≤2.00 ≤0.045 ≤0.015 16.50 -18.50 2.00 -2.50 10.00 -12.00 0.12 -0.22

Mechanical Properties of steel grade 1.4406

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
811 (≥) 821 (≥) 24 32 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 214

Physical Properties of steel grade 1.4406

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
13 - -     0.31 -  
369 115 - 33.3 343   -  
543 - 31 14.2   243 142

Heat Treatment of steel grade 1.4406

Heat treated : 1652°C - 1126°C

Technological Curves of steel grade 1.4406

Cross Reference Table (Equivalent Grade) of 1.4406

Grade Standard Country Application
X2CrNiMoN17-11-2

Relevant standard of 1.4406

NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels NF-EN-10028-7.pdf
NF EN 10088-1 Stainless steels - Part 1: List of stainless steels NF-EN-10088-1.pdf
NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes NF-EN-10088-2.pdf
NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes NF-EN-10088-3.pdf
NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes NF-EN-10088-4.pdf
NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes NF-EN-10088-5.pdf
NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels NF-EN-10222-5.pdf
NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels NF-EN-10250-4.pdf
NF EN 10272 Stainless steel bars for pressure purposes NF-EN-10272.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4406?
  • List your company on S&G now? Join
  • Non-paying users only
Top