Available 24/7 at contact@steel-grades.com

X4CrNi18-12

Description

France AFNOR NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-5, NF EN 10264-4 (2002), NF EN 10269, X4CrNi18-12 Specialsteel Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X4CrNi18-12
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel X4CrNi18-12 Austenite AFNOR France Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Chemical composition(mass fraction)(wt.%) of the X4CrNi18-12

C Si Mn P S Cr Mo Ni N
≤0.060 ≤1.00 ≤2.00 ≤0.045 ≤0.015 17.00 -19.00 ≤ ≥ 11.00 -13.00 ≤0.11

Mechanical Properties of steel grade X4CrNi18-12

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
446 (≥) 328 (≥) 14 23 21 Solution and Aging, Annealing, Ausaging, Q+T,etc 212

Physical Properties of steel grade X4CrNi18-12

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
42 - -     0.33 -  
947 931 - 21.3 134   -  
536 - 42 34.2   421 231

Heat Treatment of steel grade X4CrNi18-12

Heat treated : 1931°C - 1412°C

Technological Curves of steel grade X4CrNi18-12

Cross Reference Table (Equivalent Grade) of X4CrNi18-12

Grade Standard Country Application
X4CrNi18-12
X4CrNi18-12
X4CrNi18-12

Relevant standard of X4CrNi18-12

NF EN 10088-1 Stainless steels - Part 1: List of stainless steels NF-EN-10088-1.pdf
NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes NF-EN-10088-2.pdf
NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes NF-EN-10088-3.pdf
NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes NF-EN-10088-5.pdf
NF EN 10264-4 (2002) Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire NF-EN-10264-4-(2002).pdf
NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties NF-EN-10269.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X4CrNi18-12?
  • List your company on S&G now? Join
  • Non-paying users only
Top