France AFNOR NF EN 10028-7, NF EN 10088-1, NF EN 10088-2, NF EN 10088-4, NF EN 10296-2 (2005), 1.4318 Specialsteel Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4318 | Austenite | AFNOR | France | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Mo | Ni | N |
---|---|---|---|---|---|---|---|---|
≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.015 | 16.50 -18.50 | ≤ ≥ | 6.00 -8.00 | 0.10 -0.20 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
377 (≥) | 115 (≥) | 42 | 44 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
31 | - | - | 0.23 | - | |||
993 | 212 | - | 11.3 | 312 | - | ||
666 | - | 31 | 11.2 | 231 | 311 |
Heat treated : 1423°C - 1872°C
Grade | Standard | Country | Application |
---|---|---|---|
X2CrNiN18-7 | |||
X2CrNiN18-7 | |||
X2CrNiN18-7 | |||
X2CrNiN18-7 |
NF EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | NF-EN-10028-7.pdf |
NF EN 10088-1 | Stainless steels - Part 1: List of stainless steels | NF-EN-10088-1.pdf |
NF EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | NF-EN-10088-2.pdf |
NF EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | NF-EN-10088-4.pdf |
NF EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | NF-EN-10296-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com