France AFNOR NF EN 10088-1, NF EN 10088-2, NF EN 10088-3, NF EN 10088-4, NF EN 10088-5, NF EN 10151, NF EN 10250-4, NF EN 10263-5, NF EN 10296-2 (2005), NF EN 10297-2 (2005), 1.4016 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4016 | Ferrite | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Mo | Ni |
---|---|---|---|---|---|---|---|
≤0.080 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.015 | 16.00 -18.00 | ≤ ≥ | ≤ ≥ |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
213 (≥) | 323 (≥) | 31 | 11 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 412 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
11 | - | - | 0.34 | - | |||
668 | 132 | - | 23.3 | 344 | - | ||
483 | - | 31 | 23.2 | 344 | 324 |
Heat treated : 1564°C - 1691°C
NF EN 10088-1 | Stainless steels - Part 1: List of stainless steels | NF-EN-10088-1.pdf |
NF EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | NF-EN-10088-2.pdf |
NF EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | NF-EN-10088-3.pdf |
NF EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | NF-EN-10088-4.pdf |
NF EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | NF-EN-10088-5.pdf |
NF EN 10151 | Stainless steel strip for springs - Technical delivery conditions | NF-EN-10151.pdf |
NF EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels | NF-EN-10250-4.pdf |
NF EN 10263-5 | Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels | NF-EN-10263-5.pdf |
NF EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | NF-EN-10296-2-(2005).pdf |
NF EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | NF-EN-10297-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com