UK B.S. BS EN 10028-7, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10088-4, BS EN 10088-5, BS EN 10216-5 (2004), BS EN 10217-7, BS EN 10250-4, BS EN 10253-3, BS EN 10253-4, BS EN 10272, BS EN 10296-2 (2005), BS EN 10297-2 (2005), 1.4362 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4362 | Duplex steel | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
---|---|---|---|---|---|---|---|---|---|
≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.015 | 22.00 -24.00 | 3.50 -5.50 | 0.10 -0.60 | 0.05 -0.20 | 0.10 -0.60 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
341 (≥) | 275 (≥) | 24 | 42 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.14 | - | |||
665 | 989 | - | 34.3 | 423 | - | ||
114 | - | 32 | 32.2 | 314 | 223 |
Heat treated : 1812°C - 1524°C
Grade | Standard | Country | Application |
---|---|---|---|
X2CrNiN23-4 | |||
X2CrNiN23-4 | |||
X2CrNiN23-4 | |||
X2CrNiN23-4(AFNOR) | |||
X2CrNiN23-4(AFNOR) |
BS EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | BS-EN-10028-7.pdf |
BS EN 10088-1 | Stainless steels - Part 1: List of stainless steels | BS-EN-10088-1.pdf |
BS EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | BS-EN-10088-2.pdf |
BS EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | BS-EN-10088-3.pdf |
BS EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | BS-EN-10088-4.pdf |
BS EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | BS-EN-10088-5.pdf |
BS EN 10216-5 (2004) | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | BS-EN-10216-5-(2004).pdf |
BS EN 10217-7 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | BS-EN-10217-7.pdf |
BS EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels | BS-EN-10250-4.pdf |
BS EN 10253-3 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | BS-EN-10253-3.pdf |
BS EN 10253-4 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | BS-EN-10253-4.pdf |
BS EN 10272 | Stainless steel bars for pressure purposes | BS-EN-10272.pdf |
BS EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | BS-EN-10296-2-(2005).pdf |
BS EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | BS-EN-10297-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com