Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

X2CrNiMo17-12-2

Favorite Datasheet
1.4303 1.4404
#X2CrNiMo17-12-2 #1-4404

Description

UK B.S. BS EN 10028-7, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10088-4, BS EN 10088-5, BS EN 10216-5 (2004), BS EN 10217-7, BS EN 10222-5, BS EN 10250-4, BS EN 10253-3, BS EN 10253-4, BS EN 10263-5, BS EN 10269, BS EN 10272, BS EN 10296-2 (2005), BS EN 10297-2 (2005), X2CrNiMo17-12-2 Specialsteel Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X2CrNiMo17-12-2
Category Class Grade Type Standard Country Application
Steel GradesSpecialsteel X2CrNiMo17-12-2 Austenite B.S. UK Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Chemical composition(mass fraction)(wt.%) of the X2CrNiMo17-12-2

C Si Mn P S Cr Ni Mo N
≤0.07 ≤1.00 ≤2.00 ≤0.045 ≤0.015 16.50 -18.50 10.00 -13.00 2.00 -2.50 ≤0.11

Mechanical Properties of steel grade X2CrNiMo17-12-2

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
984 (≥) 649 (≥) 33 12 32 Solution and Aging, Annealing, Ausaging, Q+T,etc 112

Physical Properties of steel grade X2CrNiMo17-12-2

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
11 - -     0.14 -  
942 559 - 13.3 143   -  
769 - 11 44.2   142 433

Heat Treatment of steel grade X2CrNiMo17-12-2

Heat treated : 1318°C - 1642°C

Technological Curves of steel grade X2CrNiMo17-12-2

Cross Reference Table (Equivalent Grade) of X2CrNiMo17-12-2

Grade Standard Country Application
X2CrNiMo17-12-2
X2CrNiMo17-12-2
X2CrNiMo17-12-2
X2CrNiMoN17-11-2
X2CrNiMoN17-11-2
X3CrNiMoBN17-13-3
X3CrNiMoBN17-13-3

Relevant standard of X2CrNiMo17-12-2

BS EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels BS-EN-10028-7.pdf
BS EN 10088-1 Stainless steels - Part 1: List of stainless steels BS-EN-10088-1.pdf
BS EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes BS-EN-10088-2.pdf
BS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes BS-EN-10088-3.pdf
BS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes BS-EN-10088-4.pdf
BS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes BS-EN-10088-5.pdf
BS EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes BS-EN-10216-5-(2004).pdf
BS EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes BS-EN-10217-7.pdf
BS EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels BS-EN-10222-5.pdf
BS EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels BS-EN-10250-4.pdf
BS EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements BS-EN-10253-3.pdf
BS EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements BS-EN-10253-4.pdf
BS EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels BS-EN-10263-5.pdf
BS EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties BS-EN-10269.pdf
BS EN 10272 Stainless steel bars for pressure purposes BS-EN-10272.pdf
BS EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel BS-EN-10296-2-(2005).pdf
BS EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel BS-EN-10297-2-(2005).pdf
1.4303 1.4404
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X2CrNiMo17-12-2?
  • List your company on S&G now? Join
  • Non-paying users only
Top