UK B.S. BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10088-5, BS EN 10297-2 (2005), 1.4305 Specialsteel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4305 | Austenite | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
---|---|---|---|---|---|---|---|---|---|
≤0.10 | ≤1.00 | ≤2.00 | ≤0.045 | 0.15 -0.35 | 17.00 -19.00 | 8.00 -10.00 | ≤ ≥ | ≤0.11 | ≤0.10 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
361 (≥) | 415 (≥) | 44 | 33 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.34 | - | |||
593 | 935 | - | 13.3 | 322 | - | ||
276 | - | 13 | 43.2 | 441 | 132 |
Heat treated : 1662°C - 1661°C
Grade | Standard | Country | Application |
---|---|---|---|
X8CrNiS18-9 |
BS EN 10088-1 | Stainless steels - Part 1: List of stainless steels | BS-EN-10088-1.pdf |
BS EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | BS-EN-10088-2.pdf |
BS EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | BS-EN-10088-3.pdf |
BS EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | BS-EN-10088-5.pdf |
BS EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | BS-EN-10297-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com