UK B.S. BS EN 10028-7, BS EN 10088-1, BS EN 10088-2, BS EN 10088-3, BS EN 10088-4, BS EN 10088-5, BS EN 10272, BS EN 10296-2 (2005), 1.4003 Specialsteel Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4003 | Ferrite | B.S. | UK | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
C | Si | Mn | P | S | Cr | Ni | Mo | N |
---|---|---|---|---|---|---|---|---|
≤0.03 | ≤1.00 | ≤1.50 | ≤0.04 | ≤0.015 | 10.50 -12.50 | 0.30 -1.00 | ≤ ≥ | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
147 (≥) | 297 (≥) | 12 | 34 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.12 | - | |||
682 | 182 | - | 14.3 | 423 | - | ||
774 | - | 14 | 11.2 | 342 | 322 |
Heat treated : 1632°C - 1695°C
BS EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | BS-EN-10028-7.pdf |
BS EN 10088-1 | Stainless steels - Part 1: List of stainless steels | BS-EN-10088-1.pdf |
BS EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | BS-EN-10088-2.pdf |
BS EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | BS-EN-10088-3.pdf |
BS EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | BS-EN-10088-4.pdf |
BS EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | BS-EN-10088-5.pdf |
BS EN 10272 | Stainless steel bars for pressure purposes | BS-EN-10272.pdf |
BS EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | BS-EN-10296-2-(2005).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com