Germany DIN DIN EN 10088-1, DIN EN 10088-2, DIN EN 10088-3, DIN EN 10088-4, DIN EN 10088-5, DIN 17440 (1975), DIN 17441 (1997), DIN 17440 (1996), DIN EN 10028-7, DIN EN 10222-5, DIN EN 10250-4, DIN EN 10272, 1.4406 Specialsteel DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002 and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4406 | Austenite | DIN | Germany | DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002 |
C | Si | Mn | P | S | Cr | Mo | Ni | N |
---|---|---|---|---|---|---|---|---|
≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 16.5 -18.5 | 2.00 -2.50 | 10.0 -12.0 | 0.12 -0.22 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
613 (≥) | 462 (≥) | 34 | 32 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 212 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.31 | - | |||
884 | 597 | - | 41.3 | 123 | - | ||
937 | - | 24 | 42.2 | 343 | 333 |
Heat treated : 1975°C - 1294°C
Grade | Standard | Country | Application |
---|---|---|---|
X2CrNiMoN17-11-2 |
DIN EN 10088-1 | Stainless steels - Part 1: List of stainless steels | DIN-EN-10088-1.pdf |
DIN EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | DIN-EN-10088-2.pdf |
DIN EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | DIN-EN-10088-3.pdf |
DIN EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | DIN-EN-10088-4.pdf |
DIN EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | DIN-EN-10088-5.pdf |
DIN 17440 (1975) | Stainless steels - Technical delivery conditions for drawn wire | DIN-17440-(1975).pdf |
DIN 17441 (1997) | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes | DIN-17441-(1997).pdf |
DIN 17440 (1996) | Stainless steels - Technical delivery conditions for drawn wire | DIN-17440-(1996).pdf |
DIN EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | DIN-EN-10028-7.pdf |
DIN EN 10222-5 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels | DIN-EN-10222-5.pdf |
DIN EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels | DIN-EN-10250-4.pdf |
DIN EN 10272 | Stainless steel bars for pressure purposes | DIN-EN-10272.pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com