USA UNS SAE J 467 (1968), 17-14 CuMo Specialsteel Special Purpose Alloys ("Superalloys") and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Type | Standard | Country | Application |
|---|---|---|---|---|---|---|
| Steel Grades | Specialsteel | 17-14 CuMo | Precipitation-Hardening | UNS | USA | Special Purpose Alloys ("Superalloys") |
| C | Si | Mn | P | S | Ni | Cr | Al | Cu | Ti | Fe | Nb |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.12 | ≤0.50 | ≤0.75 | ≤ ≥ | ≤ ≥ | ≤14.10 | ≤15.90 | ≤ ≥ | ≤3.00 | ≤0.25 | remaining - ≥ | ≤0.45 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 148 (≥) | 646 (≥) | 11 | 42 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 12 | - | - | 0.14 | - | |||
| 137 | 375 | - | 13.3 | 321 | - | ||
| 343 | - | 23 | 24.2 | 343 | 221 |
Heat treated : 1753°C - 1574°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| 17-14 CuMo | |||
| 17-14-4LN(S31726) | |||
| X3CrNiCuMo 17-11-3-2 | |||
| 15NiCuMoNb5-6-4 | |||
| 15NiCuMoNb5 |
| SAE J 467 (1968) | Special Purpose Alloys ("Superalloys") | SAE-J-467-(1968).pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com