Available 24/7 at contact@steel-grades.com

Description

Germany AWS DIN 17441 (1985) , DIN EN 10088-1 , DIN EN 10088-2 , DIN EN 10088-3 , X15Cr13 Specialsteel Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X15Cr13
Category Class Grade Standard Country Application
Steel GradesSpecialsteel X15Cr13 AWS Germany Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Chemical composition(mass fraction)(wt.%) of the X15Cr13

C Si Mn P S Cr
0.12 -0.17 ≤1.00 ≤1.00 ≤0.045 ≤0.030 12.0 -14.0

Mechanical Properties of steel grade X15Cr13

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
826 (≥) 351 (≥) 34 22 31 Solution and Aging, Annealing, Ausaging, Q+T,etc 334

Physical Properties of steel grade X15Cr13

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
42 - -     0.13 -  
139 455 - 13.3 132   -  
671 - 44 22.2   442 141

Heat Treatment of steel grade X15Cr13

Heat treated : 1586°C - 1858°C

Technological Curves of steel grade X15Cr13

Cross Reference Table (Equivalent Grade) of X15Cr13

Grade Standard Country Application
X15Cr13

Relevant standard of X15Cr13

DIN 17441 (1985) Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes DIN-17441-(1985)-.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1-.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2-.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3-.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X15Cr13?
  • List your company on S&G now? Join
  • Non-paying users only
Top