Germany AWS DIN 17440 (1996) , DIN 17441 (1985) , DIN 17442 (1977) , DIN EN 10088-3 , DIN EN 10088-4 , DIN EN 10088-5 , DIN EN 10088-1 , DIN EN 10088-2 , DIN EN 10250-4 , DIN 17224 , DIN EN 10151 , X20Cr13 Specialsteel Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Specialsteel | X20Cr13 | AWS | Germany | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes |
C | Si | Mn | P | S | Cr |
---|---|---|---|---|---|
≤0.08 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.015 | 16.0 -18.0 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
894 (≥) | 779 (≥) | 24 | 22 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 211 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.43 | - | |||
799 | 187 | - | 34.3 | 123 | - | ||
737 | - | 21 | 21.2 | 343 | 433 |
Heat treated : 1894°C - 1977°C
Grade | Standard | Country | Application |
---|---|---|---|
X20Cr13 | |||
X20Cr13 | |||
X20Cr13 | |||
X20Cr13 | |||
X20Cr13 | |||
X20Cr13 | |||
X20Cr13 | |||
X20Cr13(AFNOR) | |||
X20Cr13(AFNOR) |
DIN 17440 (1996) | Stainless steels - Technical delivery conditions for drawn wire | DIN-17440-(1996)-.pdf |
DIN 17441 (1985) | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes | DIN-17441-(1985)-.pdf |
DIN 17442 (1977) | Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments | DIN-17442-(1977)-.pdf |
DIN EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | DIN-EN-10088-3-.pdf |
DIN EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | DIN-EN-10088-4-.pdf |
DIN EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | DIN-EN-10088-5-.pdf |
DIN EN 10088-1 | Stainless steels - Part 1: List of stainless steels | DIN-EN-10088-1-.pdf |
DIN EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | DIN-EN-10088-2-.pdf |
DIN EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels | DIN-EN-10250-4-.pdf |
DIN 17224 | Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard | DIN-17224-.pdf |
DIN EN 10151 | Stainless steel strip for springs - Technical delivery conditions | DIN-EN-10151-.pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com