Chinese
Available 24/7 at contact@steel-grades.com
SGSG
Post Your Request Now
Toggle menu
Hello, Sign inMy Account

1.4006

Favorite Datasheet
X12Cr13 X6Cr17
#X12Cr13 #1-4006

Description

Germany AWS DIN 1654-5 (1989) , DIN 17440 (1996) , DIN 17441 (1985) , DIN 17456 (1985) , DIN EN 10088-3 , DIN EN 10088-4 , DIN EN 10088-5 , DIN EN 10250-4 , DIN EN 10263-5 , DIN EN 10272 , DIN EN 10297-2 (2005) , DIN EN 10088-1 , DIN EN 10088-2 , 1.4006 Specialsteel Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: 1.4006
Category Class Grade Standard Country Application
Steel GradesSpecialsteel 1.4006 AWS Germany Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm

Chemical composition(mass fraction)(wt.%) of the 1.4006

C Si Mn P S Cr Ni
0.08 -0.15 ≤1.00 ≤1.50 ≤0.040 0.15 -0.35 12.0 -13.0 ≤0.60

Mechanical Properties of steel grade 1.4006

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV/Ku (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
587 (≥) 659 (≥) 24 22 44 Solution and Aging, Annealing, Ausaging, Q+T,etc 113

Physical Properties of steel grade 1.4006

Temperature
(°C)		 Modulus of elasticity
(GPa)		 Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)		 Specific thermal capacity
(J/kg·°C)		 Specific electrical resistivity
(Ω mm²/m)		 Density
(kg/dm³)		 Poisson’s coefficient, ν
21 - -     0.13 -  
584 329 - 44.3 442   -  
573 - 33 42.2   134 324

Heat Treatment of steel grade 1.4006

Heat treated : 1669°C - 1641°C

Technological Curves of steel grade 1.4006

Cross Reference Table (Equivalent Grade) of 1.4006

Grade Standard Country Application
X12Cr13
X12Cr13
X12Cr13
X12Cr13
G-X 12 Cr 13
G-X 12 Cr 13

Relevant standard of 1.4006

DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels DIN-1654-5-(1989)-.pdf
DIN 17440 (1996) Stainless steels - Technical delivery conditions for drawn wire DIN-17440-(1996)-.pdf
DIN 17441 (1985) Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes DIN-17441-(1985)-.pdf
DIN 17456 (1985) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17456-(1985)-.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3-.pdf
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes DIN-EN-10088-4-.pdf
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes DIN-EN-10088-5-.pdf
DIN EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels DIN-EN-10250-4-.pdf
DIN EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels DIN-EN-10263-5-.pdf
DIN EN 10272 Stainless steel bars for pressure purposes DIN-EN-10272-.pdf
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10297-2-(2005)-.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1-.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2-.pdf
X12Cr13 X6Cr17
Available Suppliers
Jiangyou Longhai Special Steel Co.,Ltd.
Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this 1.4006?
  • List your company on S&G now? Join
  • Non-paying users only
Top