Germany AWS DIN EN 10028-7, DIN EN 10088-1 , DIN EN 10088-2 , DIN EN 10088-3 , DIN EN 10088-4 , DIN EN 10088-5 , DIN EN 10272 , DIN EN 10296-2 (2005) , DIN 5512-3, SEW 400 , 1.4003 Specialsteel Flat products made of steels for pressure purposes - Part 7: Stainless steels and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Class | Grade | Type | Standard | Country | Application |
---|---|---|---|---|---|---|
Steel Grades | Specialsteel | 1.4003 | Ferrite | AWS | Germany | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
C | Si | Mn | P | S | Cr | Ni | N |
---|---|---|---|---|---|---|---|
≤0.03 | ≤1.00 | ≤1.50 | ≤0.040 | ≤0.015 | 10.5 -12.5 | 0.30 -1.00 | ≤0.030 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
622 (≥) | 544 (≥) | 31 | 41 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 412 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.22 | - | |||
297 | 194 | - | 11.3 | 321 | - | ||
211 | - | 44 | 41.2 | 223 | 423 |
Heat treated : 1395°C - 1336°C
DIN EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels | DIN-EN-10028-7.pdf |
DIN EN 10088-1 | Stainless steels - Part 1: List of stainless steels | DIN-EN-10088-1-.pdf |
DIN EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | DIN-EN-10088-2-.pdf |
DIN EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | DIN-EN-10088-3-.pdf |
DIN EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | DIN-EN-10088-4-.pdf |
DIN EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes | DIN-EN-10088-5-.pdf |
DIN EN 10272 | Stainless steel bars for pressure purposes | DIN-EN-10272-.pdf |
DIN EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel | DIN-EN-10296-2-(2005)-.pdf |
DIN 5512-3 | Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard | DIN-5512-3.pdf |
SEW 400 | Stainless steels for rolled and forged products | SEW-400-.pdf |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com