Available 24/7 at contact@steel-grades.com

Description

USA ASTM SAE AMS 5399D (2006) , SAE AMS 5545F (2010), SAE AMS 5712J (2006) , SAE AMS 5713J (2007) , SAE AMS 5800F (2006) , SAE J 467 (1968) , Rene 41 Specialsteel These products have been used typically for parts requiring high strength up to 1600 °F (871 °C) and oxidation resistance up to 1800 °F (982 °C), but usage is not limited to such applications and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: Rene 41
Category Class Grade Standard Country Application
Steel GradesSpecialsteel Rene 41 ASTM USA These products have been used typically for parts requiring high strength up to 1600 °F (871 °C) and oxidation resistance up to 1800 °F (982 °C), but usage is not limited to such applications

Chemical composition(mass fraction)(wt.%) of the Rene 41

Al B C Co Cr Cu Fe Mn Mo Ni S Si Ti
1.40 -1.60 0.0030 -0.0100 ≤0.12 10.00 -12.00 18.00 -20.00 ≤0.50 ≤5.0 ≤0.10 9.0 -10.50 ≤Remainder ≤0.0150 ≤0.5000 3.0 -3.3

Mechanical Properties of steel grade Rene 41

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
656 (≥) 179 (≥) 11 24 21 Solution and Aging, Annealing, Ausaging, Q+T,etc 222

Physical Properties of steel grade Rene 41

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
33 - -     0.31 -  
363 753 - 44.3 433   -  
816 - 12 41.2   343 134

Heat Treatment of steel grade Rene 41

Heat treated : 1599°C - 1331°C

Technological Curves of steel grade Rene 41

Relevant standard of Rene 41

SAE AMS 5399D (2006) Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated SAE-AMS-5399D--(2006)--.pdf
SAE AMS 5545F (2010) Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated SAE-AMS-5545F--(2010).pdf
SAE AMS 5712J (2006) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable SAE-AMS-5712J--(2006)-.pdf
SAE AMS 5713J (2007) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated SAE-AMS-5713J--(2007)--.pdf
SAE AMS 5800F (2006) Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted SAE-AMS-5800F--(2006)--.pdf
SAE J 467 (1968) Special Purpose Alloys ("Superalloys") SAE-J-467--(1968)--.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this Rene 41?
  • List your company on S&G now? Join
  • Non-paying users only
Top