SKD 11 Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | SKD 11 | |||
SKS 31 |
|||||
SKS 93 |
|||||
SKS 94 |
|||||
SKS 95 |
|||||
SKD 1 |
|||||
X210Cr12 |
|||||
SKD 2 |
|||||
X210CrW12 |
|||||
SKD 10 |
|||||
X153CrMoV12 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
1.4-1.6 | 0.4 | 0.6 | 0.03 | 0.03 | 11.0-13.0 | ≤ 0.25 |
Mo | Al | Cu | Nb | Ti | V | Ce |
0.8-1.2 | ≤0.25 | 0.2-0.5 | ||||
N | Co | Pb | W | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
676 (≥) | 154 (≥) | 34 | 31 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 433 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.22 | - | |||
266 | 592 | - | 34.3 | 324 | - | ||
195 | - | 42 | 43.2 | 124 | 131 |
Heat treated : 1776°C - 1982°C
Grade | Standard | Country | Application |
---|---|---|---|
SKD1 | JIS | Japan | Cold Work Die Steel |
SKD2 | JIS | Japan | Cold Work Die Steel |
SKD11 | JIS | Japan | Cold Work Die Steel |
SKD12 | JIS | Japan | Cold Work Die Steel |
SKD4 | JIS | Japan | Hot-work die steel |
SKD5 | JIS | Japan | Hot-work die steel |
SKD6 | JIS | Japan | Hot-work die steel |
SKD61 | JIS | Japan | Hot-work die steel |
SKD62 | JIS | Japan | Hot-work die steel |
SKD7 | JIS | Japan | Hot-work die steel |
SKD8 | JIS | Japan | Hot-work die steel |
ASTM 1011 | ASTM | USA | General use carbon steel bar |
UNS G10110 | UNS | USA | General use carbon steel bar |
ASTM 1012 | ASTM | USA | General use carbon steel bar |
T11 | China | Carbon tool steel | |
H11 | ASTM | USA | Alloy tool steel |
T20811 | UNS | USA | Alloy tool steel |
T30110 | UNS | USA | Alloy tool steel |
T11301 | UNS | USA | Molybdenum series High-speed tool steel |
T11302 | UNS | USA | Molybdenum series High-speed tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com