S 6-5-2 S Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | S 6-5-2 S | |||
S 12-1-4 |
|||||
HS12-1-2 |
|||||
S 12-1-2 |
|||||
1.3318 |
|||||
1.3333 |
|||||
S 3-3-2 |
|||||
HS3-3-2 |
|||||
1.3340 |
|||||
SC 6-5-2S |
|||||
HS6-5-2CS |
C |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
0.86-0.94 | 0.45 | 0.40 | 0.030 | 0.06-0.15 | 3.80-4.50 | 4.70-5.20 |
W 6.00-6.70 V 1.70-2.00 Co 4.50-5.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
391 (≥) | 375 (≥) | 43 | 41 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
32 | - | - | 0.14 | - | |||
616 | 777 | - | 11.3 | 214 | - | ||
835 | - | 43 | 42.2 | 242 | 433 |
Heat treated : 1629°C - 1712°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1030 | ASTM | USA | General use carbon steel bar |
UNS G10300 | UNS | USA | General use carbon steel bar |
ASTM 1005 | ASTM | USA | General use carbon steel bar |
UNS G10050 | UNS | USA | General use carbon steel bar |
ASTM 1006 | ASTM | USA | General use carbon steel bar |
UNS G10060 | UNS | USA | General use carbon steel bar |
ASTM 1008 | ASTM | USA | General use carbon steel bar |
UNS G10080 | UNS | USA | General use carbon steel bar |
ASTM 1010 | ASTM | USA | General use carbon steel bar |
UNS G10110 | UNS | USA | General use carbon steel bar |
ASTM 1012 | ASTM | USA | General use carbon steel bar |
UNS G10120 | UNS | USA | General use carbon steel bar |
ASTM 1013 | ASTM | USA | General use carbon steel bar |
UNS G10130 | UNS | USA | General use carbon steel bar |
ASTM 1015 | ASTM | USA | General use carbon steel bar |
UNS G10150 | UNS | USA | General use carbon steel bar |
UNS G10160 | UNS | USA | General use carbon steel bar |
ASTM 1016 | ASTM | USA | General use carbon steel bar |
UNS G10170 | UNS | USA | General use carbon steel bar |
ASTM 1017 | ASTM | USA | General use carbon steel bar |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com