S 18-1-2-15 Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | S 18-1-2-15 | |||
1.3246 |
|||||
1.3247 |
|||||
S2-9-10-8 |
|||||
HS2-9-1-8 |
|||||
S 2-9-2-8 |
|||||
HS2-9-2-8 |
|||||
1.3249 |
|||||
1.3255 |
|||||
S 18-1-2-5 |
|||||
HS18-1-2-5 |
C |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
0.60-0.70 | 0.45 | 0.40 | 0.030 | 0.030 | 3.80-4.50 | 0.50-1.00 |
W 17.5-18.5 V 1.40-1.70 Co 15.0-16.0 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
686 (≥) | 678 (≥) | 31 | 13 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.42 | - | |||
729 | 682 | - | 23.3 | 341 | - | ||
269 | - | 42 | 21.2 | 243 | 323 |
Heat treated : 1715°C - 1219°C
Grade | Standard | Country | Application |
---|---|---|---|
ASTM 1030 | ASTM | USA | General use carbon steel bar |
UNS G10300 | UNS | USA | General use carbon steel bar |
ASTM 1005 | ASTM | USA | General use carbon steel bar |
UNS G10050 | UNS | USA | General use carbon steel bar |
ASTM 1006 | ASTM | USA | General use carbon steel bar |
UNS G10060 | UNS | USA | General use carbon steel bar |
ASTM 1008 | ASTM | USA | General use carbon steel bar |
UNS G10080 | UNS | USA | General use carbon steel bar |
ASTM 1010 | ASTM | USA | General use carbon steel bar |
UNS G10110 | UNS | USA | General use carbon steel bar |
ASTM 1012 | ASTM | USA | General use carbon steel bar |
UNS G10120 | UNS | USA | General use carbon steel bar |
ASTM 1013 | ASTM | USA | General use carbon steel bar |
UNS G10130 | UNS | USA | General use carbon steel bar |
ASTM 1015 | ASTM | USA | General use carbon steel bar |
UNS G10150 | UNS | USA | General use carbon steel bar |
UNS G10160 | UNS | USA | General use carbon steel bar |
ASTM 1016 | ASTM | USA | General use carbon steel bar |
UNS G10170 | UNS | USA | General use carbon steel bar |
ASTM 1017 | ASTM | USA | General use carbon steel bar |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com