CW-1 Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Tool Steel | CW-1 | |||
| CQ-11 |
|||||
| CQ-12 |
|||||
| CQ-13 |
|||||
| CQ-14 |
|||||
| CQ-15 |
|||||
| CU-1 |
|||||
| CU-2 |
|||||
| CU-3 |
|||||
| CU-4 |
|||||
| CU-5 |
|
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 6.7 | ||||||
| Mo | Al | W | Nb | Ti | V | Ta |
| 68.9 | 1.6 | 6.7 | 5.4 | |||
| N | Co | Pb | B | Other | ||
| 10.7 | ||||||
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 936 (≥) | 929 (≥) | 24 | 21 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 12 | - | - | 0.32 | - | |||
| 671 | 374 | - | 43.3 | 214 | - | ||
| 336 | - | 33 | 31.2 | 212 | 232 |
Heat treated : 1679°C - 1616°C
| Grade | Standard | Country | Application |
|---|---|---|---|
| CW-1 | AISI | USA | W-Ta-Nb-Ti-Co class carbide |
| CW-12MW | AISI | USA | |
| CW-12MW | ASTM | USA | Castings, Nickel and Nickel Alloy |
| CW-12MW | ASTM | USA | Castings, Nickel and Nickel Alloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com