CPM 440V Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | CPM 440V | |||
UNS T91905 |
|||||
ASTM CS-7 |
|||||
CPM H13 |
|||||
CPM H19 |
|||||
CPM H19V |
|||||
CPM 1V |
|||||
CPM 3V |
|||||
CPM 9V |
|||||
CPM 10V |
|||||
CPM 10V |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
2.15 | 17.5 | |||||
Mo | Al | Cu | Nb | Ti | V | Ce |
0.5 | 5.75 | |||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
431 (≥) | 313 (≥) | 22 | 34 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
42 | - | - | 0.12 | - | |||
412 | 733 | - | 14.3 | 444 | - | ||
119 | - | 44 | 14.2 | 433 | 224 |
Heat treated : 1525°C - 1859°C
Grade | Standard | Country | Application |
---|---|---|---|
CPM H13 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19V | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM 9V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 10V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 440V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM Rex M2HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M3 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M35HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M42 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 20 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 25 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76HS | AISI | USA | Powder metallurgy high-speed tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION