CPM 9V Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | CPM 9V | |||
ASTM CO-1 |
|||||
UNS T91501 |
|||||
ASTM CS-5 |
|||||
UNS T91905 |
|||||
ASTM CS-7 |
|||||
CPM H13 |
|||||
CPM H19 |
|||||
CPM H19V |
|||||
CPM 1V |
|||||
CPM 3V |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
1.78 | 0.03 | 5.25 | ||||
Mo | Al | Cu | Nb | Ti | V | Ce |
1.3 | 9.0 | |||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
152 (≥) | 851 (≥) | 12 | 21 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.32 | - | |||
726 | 728 | - | 21.3 | 212 | - | ||
518 | - | 23 | 14.2 | 242 | 412 |
Heat treated : 1253°C - 1356°C
Grade | Standard | Country | Application |
---|---|---|---|
CPM H13 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19V | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM 9V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 10V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 440V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM Rex M2HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M3 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M35HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M42 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 20 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 25 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76HS | AISI | USA | Powder metallurgy high-speed tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION