Sweden SS S14:2754① Carbide for cutting tools and S14:2754① Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | S14:2754① | SS | Sweden | Carbide for cutting tools |
SS14:2727 |
|||||
SS14:2727 |
|||||
SS14:2736 |
|||||
SS14:2736 |
|||||
3.50-4.50 |
|||||
SS14:2750① |
|||||
SS14:2750① |
|||||
SS14:2752 |
|||||
SS14:2752 |
|||||
S14:2754① |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | V(%) | W(%) | Co(%) |
---|---|---|---|---|---|---|---|---|---|
0.75-0.85 | 0.15-0.30 | 0.20-0.40 | ≤0.030 | ≤0.030 | 4.00-5.00 | 0.90-1.60 | 1.30-1.90 | 17.5-19.5 | 5.00-6.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
431 (≥) | 796 (≥) | 14 | 34 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.14 | - | |||
364 | 236 | - | 34.3 | 134 | - | ||
731 | - | 42 | 23.2 | 413 | 232 |
Heat treated : 1324°C - 1256°C
Grade | Standard | Country | Application |
---|---|---|---|
S14:2754① | SS | Sweden | Carbide for cutting tools |
S14:2754① | SS | Sweden | Carbide for cutting tools |
BT2① | UK | Carbide for cutting tools | |
BT2① | UK | Carbide for cutting tools | |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BT20① | SS | UK | Carbide for cutting tools |
BM34① | UK | Carbide for cutting tools | |
BM34① | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION