USA AISI C-5 Machining with carbide and C-5 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | C-5 | AISI | USA | Machining with carbide |
CZ-1 |
|||||
CZ-2 |
|||||
CZ-3 |
|||||
CZ-4 |
|||||
CZ-5 |
|||||
CZ-6 |
|||||
C-1 |
|||||
C-2 |
|||||
C-3 |
|||||
C-4 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
486 (≥) | 911 (≥) | 32 | 31 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
31 | - | - | 0.43 | - | |||
358 | 882 | - | 21.3 | 331 | - | ||
865 | - | 41 | 34.2 | 141 | 232 |
Heat treated : 1948°C - 1416°C
Grade | Standard | Country | Application |
---|---|---|---|
C-5 | AISI | USA | Machining with carbide |
C-50 | AISI | USA | Machining with carbide |
C-5A | AISI | USA | Machining with carbide |
CC-50 | ASTM | USA | |
CC-50 | ASTM | USA | Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
CC-50 | ASTM | USA | Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com