Russia ГОСТ 7ΧΓ2ΒΜΦ Carbide for cutting tools and 7ΧΓ2ΒΜΦ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 7ΧΓ2ΒΜΦ | ГОСТ | Russia | Carbide for cutting tools |
11Χ4Β2ΜФ3C2 |
|||||
Χ6ΒΦ |
|||||
Χ6ΒΦ |
|||||
Χ12 |
|||||
Χ12 |
|||||
Χ12ΜΦ |
|||||
Χ12ΜΦ |
|||||
Χ12Φ |
|||||
Χ12Φ |
|||||
7ΧΓ2ΒΜΦ |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
0.68-0.76 | 0.20-0.40 | 1.80-2.30 | ≤0.003 | ≤0.003 | 1.50-1.80 | ≤0.35 | 0.50-0.80 | 0.10-0.25 | 0.50-0.90 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
488 (≥) | 623 (≥) | 11 | 34 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.21 | - | |||
149 | 144 | - | 32.3 | 341 | - | ||
388 | - | 31 | 32.2 | 141 | 144 |
Heat treated : 1446°C - 1174°C
Grade | Standard | Country | Application |
---|---|---|---|
7ΧΓ2ΒΜΦ | ГОСТ | Russia | Carbide for cutting tools |
7ΧΓ2ΒΜΦ | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION