Russia ГОСТ 5ΧΒ2CΦ Carbide for cutting tools and 5ΧΒ2CΦ Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | 5ΧΒ2CΦ | ГОСТ | Russia | Carbide for cutting tools |
4Χ2Β2ΜΦC |
|||||
5Χ3Β3ΜΦC |
|||||
5Χ3Β3ΜΦC |
|||||
4ΧC |
|||||
4ΧC |
|||||
6ΧC |
|||||
6ΧC |
|||||
6ΧC |
|||||
6ΧC |
|||||
5ΧΒ2CΦ |
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
0.45-0.55 | 0.80-1.10 | 0.15-0.45 | ≤0.030 | ≤0.030 | 0.90-1.20 | ≤0.35 | ≤0.30 | 0.15-0.30 | 1.80-2.30 | ≤0.30 | ≤0.03 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
453 (≥) | 356 (≥) | 31 | 22 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
21 | - | - | 0.32 | - | |||
388 | 953 | - | 12.3 | 233 | - | ||
894 | - | 42 | 34.2 | 241 | 231 |
Heat treated : 1931°C - 1355°C
Grade | Standard | Country | Application |
---|---|---|---|
5ΧΒ2CΦ | ГОСТ | Russia | Carbide for cutting tools |
5ΧΒ2CΦ | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION