Russia ГОСТ ВК10 Carbide for cutting tools and ВК10 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | ВК10 | ГОСТ | Russia | Carbide for cutting tools |
ВК6-М |
|||||
ВК6-ОМ |
|||||
ВК6-ОМ |
|||||
ВК6-В |
|||||
ВК6-В |
|||||
ВК8-В |
|||||
ВК8-В |
|||||
ВК8-ВК |
|||||
ВК8-ВК |
|||||
ВК10 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
486 (≥) | 735 (≥) | 14 | 44 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
43 | - | - | 0.42 | - | |||
528 | 249 | - | 44.3 | 231 | - | ||
256 | - | 21 | 34.2 | 224 | 133 |
Heat treated : 1229°C - 1822°C
Grade | Standard | Country | Application |
---|---|---|---|
ВК10 | ГОСТ | Russia | Carbide for cutting tools |
ВК10 | ГОСТ | Russia | Carbide for cutting tools |
ВК10-М | ГОСТ | Russia | Carbide for cutting tools |
ВК10-М | ГОСТ | Russia | Carbide for cutting tools |
ВК10-ОМ | Carbide for cutting tools | ||
ВК10-ОМ | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION