Russia ГОСТ ВК10-КС Carbide for cutting tools and ВК10-КС Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | ВК10-КС | ГОСТ | Russia | Carbide for cutting tools |
ВК8-В |
|||||
ВК8-ВК |
|||||
ВК8-ВК |
|||||
ВК10 |
|||||
ВК10 |
|||||
ВК10-М |
|||||
ВК10-М |
|||||
ВК10-ОМ |
|||||
ВК10-ОМ |
|||||
ВК10-КС |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
481 (≥) | 269 (≥) | 14 | 44 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.14 | - | |||
991 | 918 | - | 11.3 | 232 | - | ||
314 | - | 21 | 34.2 | 211 | 121 |
Heat treated : 1279°C - 1658°C
Grade | Standard | Country | Application |
---|---|---|---|
4Х5В2ФС | ГОСТ | Russia | Carbide for cutting tools |
4Х5В2ФС | ГОСТ | Russia | Carbide for cutting tools |
4ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
4ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
5ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
5ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
6ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
6ХВ2С | ГОСТ | Russia | Carbide for cutting tools |
6ХВГ | ГОСТ | Russia | Carbide for cutting tools |
6ХВГ | ГОСТ | Russia | Carbide for cutting tools |
ВК6 | ГОСТ | Russia | Carbide for cutting tools |
ВК6 | ГОСТ | Russia | Carbide for cutting tools |
ВК6-М | ГОСТ | Russia | Carbide for cutting tools |
ВК6-М | ГОСТ | Russia | Carbide for cutting tools |
ВК6-ОМ | ГОСТ | Russia | Carbide for cutting tools |
ВК6-ОМ | ГОСТ | Russia | Carbide for cutting tools |
ВК6-В | ГОСТ | Russia | Carbide for cutting tools |
ВК6-В | ГОСТ | Russia | Carbide for cutting tools |
ВК8-В | ГОСТ | Russia | Carbide for cutting tools |
ВК8-В | ГОСТ | Russia | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION